-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueAdditive Manufacturing
In this month’s issue, we explore additive manufacturing technology for the PCB fabricator: where it stands today, the true benefits, and where it seems to be headed.
The Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Estimated reading time: 1 minute
Contact Columnist Form
Trouble in Your Tank: Electroless Copper and D-Sep
In past columns, I presented information about the different types of ICD interconnect defect and its root causes. One key defect that was not discussed was the infamous D-sep. What exactly is D-sep? We will explore this issue and provide several suggestions for process improvement so that you don’t experience D-sep on your expensive, high-reliability printed circuit boards.
Description of the Defect
First, D-sep is a separation of the electroless copper deposit from the post interconnect. Okay, you say! But isn’t that a definition of an ICD? In a way, yes. However, D-sep occurs without a thermal excursion. Let’s list a few other considerations when discussing D-sep:
- An interconnect separation without any thermal stress;
- Stress in the electroless causes it to separate from the interconnect forming a D shape;
- Separation can cover the width of the interlayer or it can cover only a small part of it;
- Occurs most on 1 oz. layers;
- Occurs more often in center of hole;
- Generally occurs more in center of the plating rack (basket); and
- If all other factors are kept constant in the desmear and electroless line, panels with positive etch back may have D-sep when normal desmear will not.
Editor's Note: This article originally appeared in the September 2013 issue of The PCB Magazine.
More Columns from Trouble in Your Tank
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5Trouble in Your Tank: Electrodeposition of Copper, Part 6
Trouble in Your Tank: Electrolytic Copper Plating, Part 5
Trouble in Your Tank: Processes to Support IC Substrates and Advanced Packaging, Part 4
Trouble in Your Tank: Processes to Support IC Substrates and Advanced Packaging, Part 3
Trouble in Your Tank: Electrodeposition of Copper, Part 4—Addition Agents
Trouble in Your Tank: Lead-free and the Fabrication Challenge, Part 1
Trouble in Your Tank: Processes to Support IC Substrates and Advanced Packaging, Part 2