-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueAdditive Manufacturing
In this month’s issue, we explore additive manufacturing technology for the PCB fabricator: where it stands today, the true benefits, and where it seems to be headed.
The Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Estimated reading time: 1 minute
Challenges of Electrical Test
Challenges to electrical test are many, but a few come to mind as the most challenging. What do you think they are? Here’s what I think:
3. Pitch and density
2. Volume
And the #1 most challenging attribute to electrical test: soldermask! In our arena today, we can solve pitch and density with flying probe machines, and volume with our grid testers, but the catalyst that is in the mix is that pesky soldermask! So why do I bring up that necessary process as a problem for electrical test?
Electrical test is an absolute science test based on mathematics and absolutes. Frontend systems rasterize the given data to absolutes. If the IPC, Gerber, and ODB++ data show the alignment of layers to the mask, it is an absolute measurement. There are no easements for registration. The test points are assigned to the product based on the absolute clearance allowed in the “Golden” data supplied in the CAD Reference.
But there is a disconnect.
To be blatantly accurate, it never happens. The phenomenon of via cap, via fill and zeroheight via fill all come in to play to change the whole game regardless of what the OEM designed. Tolerances are never considered.
Read the full column here.Editor's Note: This column originally appeared in the January 2015 issue of The PCB Magazine.
More Columns from Testing Todd
Testing Todd: Why 4-wire Kelvin?Testing Todd: Why TDR?
Testing Todd: Positivity Boosts Employee Morale
Testing Todd: Preparing Employees for the Long Haul
Testing Todd: Where Can We Improve?
Testing Todd: Turning Into the Wind
Testing Todd: Coming Back to Life—Design Recovery
Testing Todd: Decision Time—Invest or Delegate?