-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
ESI’s New Gemstone Changing the Rules for Laser
April 7, 2015 | Barry Matties, I-Connect007Estimated reading time: 6 minutes
I sat down at CPCA 2015 with ESI’s Mike Jennings, who explained the company’s newest addition: Gemstone, an ESI-designed and manufactured laser system, with 10,000 guaranteed hours, which is poised to change the rules in flex and other printed circuit processing. Jennings also discusses ESI’s new relationship with WKK, and an increased presence in China.
Barry Matties: Mike, start by telling us the news about the new Gemstone laser system.
Mike Jennings: We've added a new member to our 5335 family of laser processing systems, and it's called Gemstone. We're starting to get away from numbers and instead use names for our systems. We had a meeting with a customer in Germany that has a laser drill that we manufactured in 1996, which is still in production today, almost 20 years later. The durability of that lends itself to a family of products we're going to use in our business unit going forward: Cornerstone, Gemstone, and Keystone.
Matties: Regarding Gemstone, is it mainly tuned for the China market and the flex market?
Jennings: It's tuned for all markets. Because of the proprietary ESI-designed and manufactured laser, it changes the rules in flex circuit processing and in other PCB processing, for three reasons: the repetition frequency is three to four times faster; the efficiency of the pulse is so much higher; and we're using a squared temporal pulse as opposed to a Gaussian temporal pulse.
Matties: Can you explain that?
Jennings: Gaussian can be used to describe both the spatial pulse, which is the form in three dimension that the pulse takes in space; but there's also a temporal side, and the temporal side is the shape of the pulse as a function of power and time, with power being in Y and time being in X. Traditionally, the industry has used the word Gaussian pulse as an all-inclusive of both functions, because that's how it has been.
For the first time, we're taking a Gaussian spatial pulse in three dimensions, and we're using a squared temporal pulse. Rather than taking half of the pulse to rise to full power, and half to drop from full power, we rise to full power in less than one nanosecond, maintain full power for almost the full pulse width, and then fall in less than one nanosecond. Above the ablation threshold, which is really what does the work on a laser, you find that we have much higher time and higher energy above the ablation threshold, combined with faster frequency, resulting in much better throughput—between 10–15%, if not more.
Matties: Aside from the throughput, what's the advantage of your laser over mechanical? Why would someone go this route?Page 1 of 2
Suggested Items
DuPont Showcases AI Innovations Featuring Advanced Interconnects at 2024 International Electronic Circuits Exhibition
05/13/2024 | DuPontDuPont announced it will showcase its comprehensive range of advanced circuit materials and solutions at the 2024 International Electronic Circuits Exhibition in Shanghai. With a product portfolio that includes fine line, signal integrity, power and thermal management, DuPont will exhibit at Booth #8L06 at the National Exhibition and Convention Center (NECC) from May 13 to 15.
MKS’ Atotech to Participate in ECTC
05/10/2024 | MKS’ AtotechAt this year’s 74th IEEE Electronic Components and Technology Conference (ECTC), MKS’ Atotech will present and demonstrate its latest product and service innovations.
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.