AT&S Provides PCB Technology and System Integration Expertise to World’s Smallest Speaker


Reading time ( words)

Graz-based start-up USound, in partnership with several Fraunhofer Institutes (IDMT, ISIT, IIS and IZM) and utilizing PCB technology together with system integration expertise from AT&S, has developed what is not only the world’s smallest speaker, but also the first based on micro-electro-mechanical systems (MEMS). The product is protected with numerous patents. MEMS are silicon chips or substrates with very small feature sizes, that have mechanical and electrical functions at the same time. They make it possible to implement extremely compact, reliable and energy-efficient solutions. With dimensions of just 5 mm x 7 mm x 2 mm, the micro-speaker has a frequency range of 2-15 kHz. 

AT&S is a technology partner of USound. Development of the MEMS micro-speaker would not have been possible without innovations in materials, silicon integration and packaging. Thanks to state-of-the-art packaging solutions, the MEMS loudspeaker itself, its drive circuits (application-specific integrated circuits, ASIC) and passive elements can be integrated into a tiny component with an extremely small form factor.

To manufacture ultra-small components of this kind, innovative system integration is essential in addition to state-of-the-art printed circuit board (PCB) technology. Thus AT&S have developed not only optimised PCB technology, but also special process engineering solutions for component and semiconductor packaging – from embedding passive components to complete System-in-Boards (SiB) and System-in-Packages (SiP). A wide range of innovative products based on AT&S technologies are manufactured in large volumes, from miniaturised computer boards to medical sensor products and MEMS microphones – and now MEMS speakers too. 

While MEMS components are widely used as acceleration and tilt sensors, and as microphones, in smartphones, wearables and vehicles, MEMS-based speakers did not exist until now. By eliminating the coil and magnet found in conventional solutions, MEMS speakers achieve extremely small dimensions along with low power consumption and very good sound quality. 

USound will transfer the presented technology into mass production. The new generation of speakers based on semiconductor technology is set to come to market in 2018. They will require only half as much space and 80 percent less power than their predecessors. USound is also aiming to create better sound quality with its MEMS speakers than with conventional speakers.

About USound GmbH

USound GmbH is a fast growing audio start-up, founded with the mission of developing and producing the most advanced audio systems for mobile applications based on MEMS technology. The patented technological platform developed by USound is enabling the production of a new, revolutionary generation of MEMS micro speakers for wide-ranging mobile applications. USound is a fabless company: process R&D and manufacturing operations are outsourced to world class industrial partners. For more information, visit www.usound.com

Share

Print


Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

04/23/2021 | Andy Shaughnessy, I-Connect007
This week, we bring you a wide swath of news, columns, and articles from the past week. Altium announced a new cloud platform that connects design stakeholders with users of its Altium 365 environment. Cadence Design Systems has acquired a company that develops computational fluid dynamics technology to help expand its system analysis offerings.

Time, Space, Structure, and Model Analysis of CCL Price Increase

04/19/2021 | Hu Yang, Zhongtai Securities Research Center
According to the CCL Association, copper foil accounts for the largest proportion of raw materials (traditional CCL uses epoxy resin, glass fiber cloth and copper as raw materials). Copper foil in thin plate accounts for about 30% of the overall cost; in thick plate copper accounts for 50%. In CCL production, using Shengyi Technology and Chaohua Technology as examples, the cost of raw materials accounts for about 88% of the total cost, with labor accounting for about 4%. Other costs such as equipment depreciation account for about 8%.

PCB Sourcing Using PCQR2

03/30/2021 | Al Block, Naji Norder, and Chris Joran, National Instruments
In a global market, it is often difficult to determine the best PCB suppliers for your technology needs, while also achieving the lowest costs for your products. Considering each PCB supplier has their own niche in terms of equipment, process, and performance, uniform test data from the IPC-9151D Process Capability, Quality, and Relative Reliability (PCQR2) Benchmark Test Standard can help find the right source for the board based on its specific technology requirements.



Copyright © 2021 I-Connect007. All rights reserved.