Arlon EMD and Doosan Electro-Materials BG to Exhibit at IPC APEX EXPO 2017


Reading time ( words)

Arlon Electronic Materials, a specialty materials supplier based in Southern California, will be teaming up with Doosan Electro-Materials BG, at the IPC APEX EXPO 2017.  Doosan will be promoting DS600 Flexible Copper Clad Laminates and DS7402, Halogen Free, High Tg FR-4 materials.  Arlon will be highlighting the technological advantages of several specialty materials including the recently released, 85HP high performance polyimide system along with the reintroduction of multiple nonwoven aramid reinforced products.

Arlon’s recent distribution agreement with Doosan Electro-Materials BG will allow Arlon to provide sales and technical support of various products from Doosan.  For Arlon EMD, this agreement enables expansion of product line offerings into the electronic materials industry, while enhancing Arlon’s focus on rigid-flex applications for military, avionics and space market segments.

The IPC APEX EXPO 2017 show will take place February 14th thru 16th, 2017 in San Diego, California.  Arlon EMD and Doosan Electro-Materials BG will be located at booth # 3602.

About Arlon: Arlon EMD is a privately held, veteran owned, US manufacturer and distributor of specialty materials. Arlon has supplied materials for the N. American, UK and European markets for more than 25 years from their manufacturing location in Rancho Cucamonga, California.

For additional information, please visit our website.

Share


Suggested Items

Setting the Record Straight: CEO Asher Levy on the Future of Orbotech

04/23/2018 | Barry Matties, I-Connect007
With the recent planned acquisition of Orbotech in place by maker KLA-Tencor, much of the industry has speculated about Orbotech’s future. Barry Matties spoke with CEO Asher Levy about what lies in store for the Orbotech group and, more specifically, their PCB division should the deal close.

Everyone is a Customer; Everyone is a Supplier

04/18/2018 | Patty Goldman, I-Connect007
We’ve all heard the cliché: What goes around, comes around. I’ve always felt that was especially true in our industry, with the frequent job changes people make—much accelerated in recent years but always a factor, since I can remember.

IPC 6012-DA Revisions: The Approach to Cleanliness, Thickness, Inspection, and Wicking

04/13/2018 | Jan Pedersen, ELMATICA
IPC’s Automotive Addendum task group was started in November 2014 and the first edition of IPC 6012-DA was released in April 2016. We are now working on the revised version, and expect a release in Q2 2018. As standards need to evolve, develop and follow the needs of the industry, this work is continuous.



Copyright © 2018 I-Connect007. All rights reserved.