-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
IPC Designers Council Orange Co. Chapter Holding Lunch ‘n’ Learn April 19
April 5, 2017 | Scott McCurdy, Freedom CAD ServicesEstimated reading time: 2 minutes
The Orange County Chapter of the IPC Designers Council is holding a Lunch ‘n’ Learn event on April 19 at JT Schmid’s Restaurant & Brewery in Anaheim. This meeting features two speakers and takes place from 11:30 am - 1:30 pm in the Regan Room at JT Schmid's.
The first speaker is Cuong Nguyen, Field Applications Engineering Manager with EDA Direct. His presentation is titled "High-Speed DDR4 Memory Design and Power Integrity Analysis: What designers need to know to achieve the best performance with DDR4."
DDR4 is an entirely new memory architecture with higher bandwidth, lower power consumption, and higher memory capacity. Incorporating DDR4 memory interfaces in today’s design poses many challenges for both the EE’s as well as the layout engineers. These high-speed interfaces require careful considerations in terms of optimizing the electrical signaling between sensitive components and to minimize the noise from high switching activities from the memory devices. Layout constraints must be carefully specified to ensure tight timing alignment for clock and strobe signals. In addition, the power distribution network (PDN) also became more fractured to support the many supplies required by current ASIC and FPGA devices. This, an insufficient decoupling for the supplies, can potentially create more noise, crosstalk, and increase the EMI in the system.
In this seminar, we will review the DDR4 architecture, routing topologies, signaling protocols, how it can be simulated on the PCB, and how to maximize PDN designs from a layout perspective. Based on the simulation results, optimizing trace routing, board stackup, component placements, connectors, terminations, and other tradeoffs can be implemented to maximize the performance of your design.
The second speaker is Ammar Abusham, Senior Applications Engineer with Mentor Graphics, presenting "Better PCB Design Using the Fabricator’s View: What designers need to know about DFM verification and its impact on your design." You are an experienced PCB designer using a good CAD flow. So why is it that what appears to be a good design to you and your layout tool always seems to raise a bunch of questions with your fabricator?
Well, the fabricator sees things differently than you. If you’re like most designers, you are very focused on designing a PCB to the electrical and form-factor specifications. And of course, you take pride in how clean your design looks. Your fabricator on the other hand, is mostly paying attention to those aspects of your design which affect yield, costs, and delivery. To avoid any unpleasant surprises in these areas, it might make sense to put yourself in your fabricator’s shoes for a moment and see some of the checking they will perform on your design data prior to committing it to fabrication. To do this, we’re going to step through a typical PCB fabrication process and identify where DFM issues are likely to show up and what the fabricator is looking for.
Reserve a spot on your calendar on Wednesday, April 19 from 11:30 am to 1:30 pm for this educational “Lunch ‘n Learn” meeting event.
Location
JT Schmid’s Restaurant & Brewery (in Regan’s Room)
2610 E. Katella Ave.
Anaheim, CA 92806
Google MAP to our meeting in Anaheim
Cost: $15 at the door to help cover the lunch cost. Please RSVP no later than noon on Tuesday, April 18.
To RSVP:
We look forward to seeing you!
Scott McCurdy, President, IPC Designers Council - Orange County chapter
Freedom CAD Services
cellphone: 714-425-3235
scott.mccurdy@freedomcad.com
www.ocipcdc.org
Suggested Items
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.