Sierra Proto Express Installs atg S-Technology Flying Probe System for HDI Electrical Test


Reading time ( words)

Sierra Proto Express has installed a new atg Luther & Maelzer GmbH S2-16DS, a 16-head, double-sided, high-speed, high-accuracy flying probe test system. This acquisition will enable Sierra Proto Express to test some of their latest ultra-fine HDI designs with pad sizes smaller than 25μm.

The atg S2-16DS dual shuttle testers utilize 16 test heads, multiple optical recognition systems, and a wide variety of advanced, high-speed electrical test measurement techniques to electrically test all types of PCBs for continuity and isolation. Board sizes of 24” x 24’ (or larger), with 20μm pad / 40μm pitch technology can be tested at a rate of up to 400 test points per second (depending on test method used). Special options, such as, 4-wire Kelvin test, hi-pot test, Latent defect test, and others can be provided.

About Sierra Proto Express

Sierra Proto Express in Sunnyvale, California is a leading supplier of highly advanced HDI products as well as microelectronic  printed circuit boards. Sierra Proto Express is serving diverse markets with specialties in military, aerospace and commercial products. Sierra Proto holds numerous high-reliability certifications such as: MIL-PRF-55110, IPC-A-600E, UL-94-V0, IPC-SM-840C, ISO 9001, ISO 13485,and ITAR.

About atg Luther & Maelzer

With more than 170 employees worldwide, atg Luther & Maelzer is the leading supplier of electrical testing solutions for the printed circuit board industry. atg Luther & Maelzer offers two product lines: flying probe and universal grid testers.

atg Luther & Maelzer is a company of Xcerra Corporation, which provides capital equipment, interface products, and services to the semiconductor, industrial, and electronics manufacturing industries. Xcerra Corporation offers a comprehensive portfolio of solutions and technologies, and a global network of strategically deployed applications and support resources. Additional information can be found at www.atg-LM.com  and www.Xcerra.com

Share

Print


Suggested Items

EPA, Industry Come Together in Visit to TTM Facility

07/18/2019 | Kelly Scanlon, director, EHS policy and research
IPC member TTM Technologies is proud to show off the new wastewater-treatment system at its Sterling, Virginia plant, which is helping to enhance the company’s pollution prevention and resource recovery performance.

Dissecting the IPC Regional Survey on PCB Technology Trends

07/15/2019 | I-Connect007 Editorial Team
Sharon Starr, Denny Fritz, and Mike Carano talk about the global 2018 IPC Technology Trends Report released early this year—the size of the survey, how it was conducted, the general findings, and regional differences. They also shared their takeaways and regional insights, and the industry outlook over the next five to 10 years.

Identifying Product Board Class and Pre-quote Software

07/09/2019 | Mark Thompson, CID, Prototron Circuits
Deciding on the class of the final product will determine what files are needed for fabrication and assembly. It is critical to note that for a product to be built to any class level, it must be designed to that class level from its inception.



Copyright © 2019 I-Connect007. All rights reserved.