Ventec International Materials Certified to Latest IPC-4101 Revision E


Reading time ( words)

Further to the latest release of the IPC-4101 revision E, Ventec International Group announces that as of 1st July 2017, all related products are certified and released to the IPC-4101E standard.

Following an internal review process, Ventec materials meet all the requirements of the new IPC-4101 Revision E standard (Specification for Base Materials for Rigid and Multilayer Printed Boards). Back in 2014, Ventec International Group declared its support for the proposal led by ESA, the European Space Agency, to define supplemental requirements to the IPC4101D specification for base materials for rigid and multilayer PCBs. The latest revision E of the specification replaces IPC-4101D-WAM1 and formally includes an Appendix A that provides supplemental inspection requirements for base materials used in high-reliability PCBs for critical applications, with particular reference to the prevention and detection of foreign material inclusions (FOD) early in the supply chain.

Ventec has been inspecting, testing, and releasing materials to the standard for many years. The company continues its commitment to ongoing strategic investments in clean-room equipment and facilities that demonstrate Ventec’s principles of continuous improvement to consistently achieve the highest delivered quality to all its customers including military & aerospace and automotive customers. The latest investments will add AOI onto all treaters in Suzhou, China starting with highest reliability materials for high reliability applications (VT-901 and VT-90H polyimide as well as the full range of No Flow / Low Flow prepregs for rigid flex applications). 

Mark Goodwin, COO Europe & USA commented: "Our approach to manufacturing and supplying laminates & prepregs covers the entire supply chain. We follow rigorous procurement, manufacturing and auditing processes at all our manufacturing sites and global service centers to ensure our materials and our services are consistently of the highest quality. This includes ensuring that our materials always comply with the prevailing standards."

About Ventec International

With volume manufacturing facilities and HQ in Suzhou China, Ventec International specializes in advanced copper clad glass reinforced and metal backed substrates for the PCB industry. With distribution locations and manufacturing sites in both the US and Europe, Ventec International is a premier supplier to the Global PCB industry. For more information, click here.

Share


Suggested Items

EIPC’s Winter Conference in Lyon, France: Day 2 Review

02/20/2018 | Pete Starkey, I-Connect007
The first day of the conference had started and ended in the dark—a long and technically intense day! After a convivial conference dinner and a good night’s sleep we were back on the bus, this time in daylight at the slightly later time of 8:00 a.m., for the journey from downtown Lyon back to Alstom’s conference facility in Villeurbanne, and it wasn’t raining. In fact, there was even some sunshine later in the day!

RTW…HKPCA & IPC Show 2017 Highlights With Canice Chung

12/08/2017 | Real Time with...HKPCA and IPC
Canice Chung, chairman of the HKPCA, speaks with Managing Editor Stephen Las Marias about the record-breaking show, held this week in Shenzhen, China.

RTW HKPCA & IPC Show 2017: IPC Asia’s Philip Carmichael on the Changes in PCB Value Chain

12/07/2017 | Real Time with...HKPCA and IPC
During the 2017 International Printed Circuit & APEX South China Fair (HKPCA & IPC Show 2017) in Shenzhen, IPC Asia President Philip S. Carmichael speaks with I-Connect007 Managing Editor Stephen Las Marias about the move in the value chain that’s driving the electronics manufacturing industry forward.



Copyright © 2018 I-Connect007. All rights reserved.