Nordson MARCH Launches New-Gen RollVIA Plasma System for R2R PCB Manufacturing


Reading time ( words)

Nordson MARCH, a Nordson company, has launched its new-generation RollVIA plasma system, a completely self-contained vacuum plasma system with production-proven, roll-to-roll material handling for flexible printed circuit board (PCB) manufacturing. The new RollVIA incorporates unique vacuum and gas flow technology, new process control technology, updated electrode designs, and superior temperature management with precise control of roll speed, tension, and edge guidance for uniform plasma treatment of substrates as thin as 25 microns. The RollVIA system is used for plasma applications such as surface activation for improved adhesion, carbon removal and descum/desmear for cleaner surfaces, and etchback, which removes a slight amount of dielectric contamination between internal copper planes during production of PCBs.

Roll-to-roll processing, also known as web processing, reel-to-reel processing, or R2R, is the process of creating electronic devices on a roll of flexible plastic or metal foil. The RollVIA plasma treatment system is self-contained so that the vacuum system, plasma chamber, control electronics, and 40 kHz power supply are housed in a single enclosure. Yet the system has a compact 1737 x 2020 x 2323 mm (69 x 80 x 92 in) footprint and can handle and process web widths from 48 to 600 mm. A service-friendly design with three doors for full front and rear access make substrate loading simple and easy.

The RollVIA system's performance capabilities are complemented by low cost-of-ownership features. In addition to the system's compact and service-friendly design, the RollVIA allows for vertical processing so that equal plasma treatment can be applied to both sides of the substrate, maximizing product quality and throughput. The fast vacuum pump down and process cycle times further add to the throughput and productivity of the system. It's configurable with 1, 3, or 5 plasma cells to meet process requirements.

Nordson MARCH will be exhibiting with partner Zhuhai Unite-Effort Industries Co., Ltd. at HKPCA, being held at the Shenzen Convention & Exhibition Center (SZCEC), Shenzhen, China, from 06 Dec 2017 - 08 Dec 2017 in booth 1V03. Stop by to learn how we can help with all your plasma treatment requirements.

About Nordson MARCH

Nordson MARCH is the global leader in plasma processing technology for the semiconductor, printed circuit board (PCB), microelectronics, and life science & medical device manufacturing industries. Nordson MARCH has offices and laboratories worldwide, including California, Europe, Singapore, China, Japan, Korea and Taiwan. With over 25 years of continuous innovation, Nordson MARCH designs and manufactures a complete line of award-winning and patented plasma treatment systems. An expert staff of scientists and engineers is available to assist in the development of plasma processes that improve product reliability and increase production yields. Visit Nordson MARCH here.

About Nordson Corporation

Nordson Corporation delivers precision technology solutions that help customers succeed worldwide. Precision dispensing of adhesives, coatings, sealants, biomaterials, and other fluids, plastic extrusion and injection molding, electronics testing and inspecting, and surface preparation are supported by applications expertise and direct global support. Nordson serves consumer non-durable, durable and high-technology markets, specializing in packaging, nonwovens, electronics, medical, energy, transportation, construction, and product assembly. Founded in 1954, headquartered in Westlake, Ohio, USA, Nordson has operations and support offices in 30+ countries. Connect with Nordson here.

Share

Print


Suggested Items

Solder Mask Curing: UV Bump Overview

08/19/2019 | Nikolaus Schubkegel
Ultraviolet (UV) bump, also called UV cure, is a processing step in which the solder mask pattern is irradiated with ultraviolet and infrared light. This step is performed with special equipment that is built as a continuous flow system, which consists of a conveyor belt and tubular UV lamps mounted above and below the belt. Read on to find out more about this process.

Avoiding CAF Failures at the IPC High-reliability Forum

12/31/1969 | Andy Shaughnessy, I-Connect007
Foresite CEO Terry Munson recently spoke with Andy Shaughnessy during the IPC High-Reliability Forum and Microvia Summit in Baltimore about his presentation on the causes of conductive anodic filament (CAF), the dangers of resin starvation, and what advice he'd give to PCB designers to avoid those types of failures.

A Guide to High-reliability PCBs from Design to Specification

07/24/2019 | Jeff Beauchamp, NCAB Group
Creating reliable PCBs is an outcome of considering all aspects that can affect reliability as early as possible in the design process. The further down the design process, the more expensive and risky it can be to fix. As they say, everything starts with the design. Because a good board design improves the reliability of the end product and lessens the risk of failure.



Copyright © 2019 I-Connect007. All rights reserved.