American Standard Circuits Installs Comac HRL-24-S Hot Roll Laminator


Reading time ( words)

American Standard Circuits recently purchased and installed a new Comac HRL-24-S Hot Roll Laminator.

“This is another example of the kind of investments we are making at American Standard Circuits in order to make sure we are not only keeping up with our customers’ needs but also staying ahead of those needs in order to be prepared for their future requirements as well,” stated CEO and president of ASC, Anaya Vardya.

The Comac HRL-24S is one of the most advanced hot roll laminators in the industry. The HRL-24S applies fine-line dry-film etch and plating resists for the fabrication of printed circuits boards and FPC flexible circuits.  State-of-the-art features of the new Comac HRL-24S include air expansion core shafts, electronic film tensioning system, micro-regulated film alignment, and dual pressure cylinders, as well as a tacky roll cleaning and wet lamination device.

Vardya added, “The Comac will be a great addition to our ever-expanding production floor.”

About American Standard Circuits

American Standard Circuits (ASC) prides itself on being a total solutions provider, manufacturing quality rigid, metal-backed, RF/microwave, flex, and rigid-flex PCBs for the medical, automotive, industrial, defense, and aerospace markets in volumes from test and prototypes to large production orders. ASC has the expertise to provide a wide variety of technologies in a time-critical environment. Their qualifications include AS9100 Rev D, ISO 9001:2015, MIL-PRF 31032, MIL-PRF-55110, MIL-PRF-50884 certification and ITAR registration. In addition to manufacturing in the USA, ASC has the ability to transition and manage your PCB requirements to lower cost regions via its qualified supply chain of offshore partners. ASC also holds many key patents for metal bonding processes. For more information about American Standard Circuits' services or to ask one of their technology experts a question click here.

Visit I-007eBooks to download your copies of American Standard Circuits’ micro eBooks today:

The Printed Circuit Board Designer’s Guide… to Fundamentals of RF/ Microwave PCBs

The Printed Circuit Designer's Guide to... Flex and Rigid-Flex Fundamentals

Share

Print


Suggested Items

New Technical Director and Upcoming 2019 EIPC Summer Conference

05/15/2019 | Nolan Johnson and Pete Starkey, I-Connect007
Tarja Rapala-Virtanen is the newest technical director for the EIPC. I-Connect007's Nolan Johnson and long-time EIPC conference attendee Pete Starkey discuss her new role, the upcoming summer conference in Leoben, Austria, and the program in place for the June conference.

University Students Point to the Future in their Research

04/23/2019 | Nolan Johnson, I-Connect007
Cutting-edge automation, AI, machine learning, and Industry 4.0 are all part of the response to the increasing demands for printed circuit boards that are not only faster, smaller, and cheaper but also higher-frequency, lower-loss, more temperature tolerant, and higher reliability. In many cases, it will be unique and advanced research coming out of the university system that will help move the industry forward.

EIPC Winter Conference, Day 2

04/03/2019 | Alun Morgan, EIPC
After the papers from the first day of the EIPC Winter Conference in Milan on February 14–15, the delegates were hosted at a reception and plant tour of Elga Europe at their nearby production facility. Here's a recap of the events and highlights of the Day 2 of the conference.



Copyright © 2019 I-Connect007. All rights reserved.