Microtek Laboratories China Achieves APTIV Laboratory Approval


Reading time ( words)

Microtek Laboratories China has completed verification requirements and approval for Aptiv Advanced Safety and User Experience. Aptiv audited the Changzhou facility and approved Microtek as an Aptiv Approved Test Laboratory. The approval is granted until April 2024. Microtek is the only authorized testing institution for APTIV in the Asia-Pacific region.

Microtek can now perform qualification tests approved by the Aptiv Advanced Safety & User Experience Component Engineering in SQ-1000 Appendix II.

The test data supplied by Microtek to any Component Engineer will be used by them to meet the requirements of Production Part Approval Process (PPAP) and by Aptiv Safety and User Experience for the purpose of granting part approval.

About Aptiv

Aptiv is a global technology company that develops safer, greener and more connected solutions, which enable the future of mobility.  Aptiv leadership in smart mobility solutions comes directly from its expertise in software, computing platforms and machine learning artificial intelligence (AI). Aptiv sees cities where all the infrastructure elements are connected, all vehicles on the road are connected, and the other transportation services are linked at the same time.

About Microtek Laboratories China

Microtek Laboratories China is a leading third-party testing agency, serving the electronics and polymeric materials manufacturing industry world-wide. It is operated in accordance with the ISO/IEC17025: 2005 management system, accredited by CNAS, CMA, and many large OEM’s. The lab provides testing and conformance verification to company, national & international standards for automotive, telecommunication, aerospace & aviation, electronic information products, polymeric products and other related industries and suppliers. It is a CQC licensed lab for "Non-metal materials" including printed circuit boards (PCB), copper-clad laminates (CCL) and plastics. The lab is also designated as the product service center for CPCA, an authorized training center for IPC-6012, IPC-A-610 & IPC-A-600, as well as a IPC Validation Services Qualified Test Laboratory for IPC-6012 and IPC-4101. In addition, Microtek Laboratories China has the capability of temperature and humidity calibration as recognized by CNAS.

Share


Suggested Items

More Than a Word: Solder Mask

08/15/2018 | Patty Goldman, I-Connect007
Do you spend time, as I do, musing on the language of PCBs? We have developed our own lexicon to convey as much by picture, as by word, what exactly we mean.

Calumet Electronics on IMPACT 2018

08/14/2018 | Patty Goldman, I-Connect007
This year at IMPACT Washington, DC, I-Connect007's Patty Goldman sat down with Steve Vairo and Mike Kadlec of Calumet Electronics, to get their overview on the event.

Study on Application of Four-Wire and Four-Terminal Flying Probe Test Scheme

08/10/2018 | Jin Erbing, Joint Stars Technology Co., Ltd
With the four-wire and four-terminal flying probe test method, voids in the holes formed in the PCB due to process differences, thin copper, and poor conduction due to residual adhesive after laser drilling of the HDI board can be detected, and the circuit board guide can be solved. With the development of multilayer, high-density PCB layout, four-wire four-terminal flying probe testing will play an increasingly important role.



Copyright © 2018 I-Connect007. All rights reserved.