Candor is Breaking Boundaries with Flex-Core Boards


Reading time ( words)

Candor Industries has successfully manufactured 0.5-mil flex-core boards with 0.5-oz copper and 4-mil plated vias.

Sunny Patel, Candor’s technical sales manager, remarked about the accomplishment, "We are pushing the limits on our flex manufacturing, going for much thinner substrates and different material stiffeners."

Thinner material processing allows for better real estate savings for Candor’s flex customers when fitting into smaller packaging. By working together with Candor, developing these types of prototypes will allow for faster lead times with better cost savings down the road.

"Customers need hard, but thin, materials in thin core applications. We’ve found that stainless steel is a good fit for this and we can easily provide this service in-house using our unique flex processing,” said Patel.

Conventional board shops may have trouble getting tooling holes in stainless without CNC subcontracting. Due to their continual investments in the needs of their customers, Candor is able to provide detailed cutting of stainless sheets in-house.

About Candor Industries

Since 1999, Candor Industries has provided 21st Century customers with innovative PCB solutions for complex technologies through a commitment to service and support. Limitations created by standard manufacturing methods led Candor to invent and develop certain technological advancements, helping them to emerge in the forefront as a top of the line solutions provider. Candor continues to push the envelope of PCB manufacturing through continuous R&D, helping both customers and the industry to a brighter future. For more information about Candor, click here.

Share

Print


Suggested Items

Dissecting the IPC Regional Survey on PCB Technology Trends

07/15/2019 | I-Connect007 Editorial Team
Sharon Starr, Denny Fritz, and Mike Carano talk about the global 2018 IPC Technology Trends Report released early this year—the size of the survey, how it was conducted, the general findings, and regional differences. They also shared their takeaways and regional insights, and the industry outlook over the next five to 10 years.

An Examination of Glass-fiber and Epoxy Interface Degradation in Printed Circuit Boards

07/12/2019 | Bhanu Sood, Michael Osterman, and Michael Pecht, Center for Advanced Life Cycle Engineering
Multilayer organic laminates, which make up over 90% of the interconnecting substrates in electronics (standard FR-4 represents 85% of the substrates used for laminates), can develop a loss of electrical insulation resistance between two biased conductors due to conductive filament formation.

PCB Reliability: Via Design

07/12/2019 | Greg Ziraldo, Advanced Assembly
When considering the long-term reliability of a PCB, you must take into account any vias on your board. While an invaluable and essential part of board design, vias introduce weaknesses and affect solderability. This article will discuss vias, the potential concerns that are introduced into your board through their implementation, and how to minimize those concerns to acceptable levels.



Copyright © 2019 I-Connect007. All rights reserved.