U.S. Circuit Acquires Miva LED Direct Imager


Reading time ( words)

U.S. Circuit has recently added a Miva 2000L LED Direct Imager to their Escondido fabrication facility. The laser imaging of the Miva 2000L allows for more precise and consistent imaging without the defects previously allowed by photo imaging. The Miva system also provides exact positioning and improved resolution allowing for tighter, more accurate lines, spaces and alignment. Miva’s quad engine LED light head will permit almost any photoresist to be utilized, and ultimately reduces the facility environment impact on these images.

Benefits include:

  • 3 different wavelengths to expose all types of soldermask with little-to-no defects.
  • 50, 25, 12.5 micron resolutions
  • Broad spectrum, broad applications
  • Patented auto-focus technology standard
  • World class registration technology
  • Smallest footprint, lowest operating cost
  • Largest Panel Size: 24” x 24”

U.S. Circuit President Mike Fariba said, “This machine gives us all the advantages of direct imaging.  Not only will it improve our accuracy and speed but allow us to produce smaller, higher density boards. 100% of inner and outer layers are digitally imaged.  Traditional photo imaging is now an obsolete process. It also represents our continued effort to provide our customers the best technology to fulfill all of their fabrication needs.”

About U.S. Circuit

For over 33 years, U.S. Circuit has been a premier supplier of commercial PCBs and for the past several years a supplier for the military and aerospace market. U.S. Circuit has experienced continued growth in a challenging economy through consistently high performance, on-time delivery, superior quality and an emphasis on the highest level of customer service. U.S. Circuit is proud to be the circuit board manufacturer for more than 400 growing companies.

Share


Suggested Items

PCB Design, Fabrication and Use from the Mil-Aero End-User Perspective

08/28/2018 | Pete Starkey, I-Connect007
The procedures described for Rolls Royce were directly comparable with those described for MBDA, and the presenters were unanimous in re-emphasising the importance of working closely with their chosen PCB fabricators at all levels and all stages of design, qualification and production of their circuit boards.

Calumet Electronics on IMPACT 2018

08/14/2018 | Patty Goldman, I-Connect007
This year at IMPACT Washington, DC, I-Connect007's Patty Goldman sat down with Steve Vairo and Mike Kadlec of Calumet Electronics, to get their overview on the event.

Catching up with LiloTree’s Dr. Kunal Shah

08/02/2018 | Dan Beaulieu
Every so often, a new product comes around that promises to be a game changer and LiloTree has one of those products. Not only is it cyanide-free, it has the potential to save 40% on your entire ENIG process and is proving to be far more stable than traditional ENIG products.



Copyright © 2018 I-Connect007. All rights reserved.