atg Luther & Maelzer Extends Range of Flying Probe Test Systems


Reading time ( words)

atg Luther & Maelzer GmbH extended its range of Flying Probe test systems by launching a line for test areas of up to 40’’ width. The oversized systems complement the standard line which can load boards with sizes of up to 27’’ width.

Special network technology and aerospace applications are driving the demand for high test coverage and 4-wire testing (Kelvin test) for large PCBs. However, 4- or 8-head solutions are not satisfying customer requirements for speed and throughput. The unique and industry leading architecture of the atg Luther & Maelzer flying probe systems makes it possible to use a higher number of probes per test area resulting in faster test time and lower cost of test. To meet these requirements atg Luther & Maelzer GmbH launched the 16-,  20- and 24-head machines with test areas of up to 40’’ width. Depending on the number of test heads, the resulting maximum test area sizes are 40’’x40’’, 40’’x50’’ or 40’’x60’’.

atg Luther & Maelzer Sales Director for Europe and responsible product manager, Peter Brandt, highlights: “The new systems make our high end test methods now also available for the test of oversized PCBs. When considering that the 24 head version allows up to 15,000 contacts per minute, it is a significant leap forward for our customers.“

About atg Luther & Maelzer

With more than 180 employees worldwide, atg Luther & Maelzer is the leading supplier of electrical testing solutions for the Printed Circuit Board industry. atg Luther & Maelzer offers two product lines: flying probe and universal grid testers.

atg Luther & Maelzer is a company of Xcerra™ Corporation, which provides capital equipment, interface products, and services to the semiconductor, industrial, and electronics manufacturing industries. Xcerra Corporation offers a comprehensive portfolio of solutions and technologies, and a global network of strategically deployed applications and support resources.

To learn more about the atg Luther & Maelzer’s product portfolio, please click here.

 

Share

Print


Suggested Items

Stacked Microvia Reliability: Ongoing Work and Upcoming IPC Conference

04/24/2019 | Pete Starkey, I-Connect007
One year ago, Happy Holden's review of the 2018 IPC High-Reliability Forum reported the presentation of J.R. Strickland and Jerry Magera, who described research at MSI Applied Technology into overcoming the risk of stacked microvia failures escaping standard quality assurance procedures. Their report provided a basis for the IPC white paper IPC-WP-023, which addressed reliability issues associated with stacked microvias and included data collected from several other printed circuit manufacturers.

EIPC Winter Conference, Day 2

04/03/2019 | Alun Morgan, EIPC
After the papers from the first day of the EIPC Winter Conference in Milan on February 14–15, the delegates were hosted at a reception and plant tour of Elga Europe at their nearby production facility. Here's a recap of the events and highlights of the Day 2 of the conference.

RTW IPC APEX EXPO 2019: Atotech Discusses Developments in Metallization Chemistries

02/04/2019 | Real Time with...IPC
Roger Massey, technical marketing manager at Atotech, and Technical Editor Pete Starkey discuss the challenges technologists face as circuit lines and spaces get smaller and smaller, and the latest developments in metallization chemistries to help customers address these issues.



Copyright © 2019 I-Connect007. All rights reserved.