Ventec Expands ThinFlex Inventory in Europe


Reading time ( words)

Ventec International Group Co., Ltd. is expanding its ThinFlex inventory to multiple European locations with full cutting capability in both Germany and the UK.

Following the acquisition of TMT Trading GmbH in June 2016, Ventec has continued to maintain and build upon its position as the supply chain partner of choice for ThinFlex (Arisawa) materials in Europe. To offer even greater value to its customers, Ventec has expanded its ThinFlex inventory in Germany and the UK, offering full cutting capability in both locations. ThinFlex materials are fully compatible with Ventec’s low-flow and no-flow prepreg lines, VT-901 (Polyimide / PI), VT-47 & VT-447 (high-reliability epoxy) for use in flex-rigid constructions, as well as with the full Ventec range of copper clad laminates & prepregs.

With its one-stop-service solution for PCB materials to the European PCB and electronics industry, customers can rely on Ventec’s fully accredited and controlled global supply chain (ISO9001 & AS9100 Rev D) that ensures product quality, consistency and reliability. Ventec’s wider product offering includes complementary consumable products such as standard and speciality drill materials (centrum and glossback), copper foils including advanced copper foils (ACF).

About Ventec International Group

With volume manufacturing facilities and Headquarters in Suzhou China, Ventec International specializes in advanced copper clad glass reinforced and metal backed substrates for the PCB industry. With distribution locations and manufacturing sites in both the US and Europe, Ventec International is a premier supplier to the Global PCB industry. For more information, click here.

Visit I-007eBooks to download your copy of Ventec micro eBook today:
The Printed Circuit Designer's Guide to...Thermal Management with Insulated Metal Substrates

Share




Suggested Items

Michael Carano: A Focus on Process Control, Part 2

09/28/2022 | I-Connect007 Editorial Team
In this second half of our conversation, Michael Carano discusses some of the metrics that fabricators need to consider before investing in new processes, especially process control technologies, and some of the challenges board shops face updating brownfield sites.

Catching Up With John Johnson, New Director of Business Development at ASC

09/28/2022 | Dan Beaulieu, D.B. Management Group
It’s always good to catch up with old friends, especially when you can start working together. I recently spoke with my friend John Johnson, who has joined American Standard Circuits as the director of business development. At ASC, John will be using the Averatek A-SAP process that he was previously involved with. He shares some of his background and provides insight on the best ways to use this semi-additive PCB fabrication process that opens the capability window for forming trace and space.

A Focus on Process Control, Part 1

09/27/2022 | I-Connect007 Editorial Team
Michael Carano is a noted subject matter expert with respect to process control, electroplating and metallization technology, surface finishing, and reliability. So, it was only natural that we sat down to talk about mechanizing an existing facility given today’s fickle environment. Will any of the CHIPS funding trickle down to bare board fabrication? What process can be adjusted on the factory floor? The focus needs to be more than just on manufacturing and getting work out the door, he says, but also process control.



Copyright © 2022 I-Connect007. All rights reserved.