American Standard Circuits Acquires Lenz Router


Reading time ( words)

PCB fabricator American Standard Circuits (ASC) recently acquired the RLG 550-2 routing machine from Lenz.

“This new RLG-550-2 routing equipment improves our controlled depth milling process which is critical in rigid-flex manufacturing. The Lenz router is a camera-based system that enables scaling optimization. The spindle speeds and microlubrication systems facilitate routing/drilling thick metal-backed and metal-core substrates, which is important in allowing us to service our IMPCB and RF metal backed customers,” says Anaya Vardya, president and CEO of ASC. “This is a machine that performs so well, and at such speed, that it will also improve our process time. This is a critical attribute that helps us to continue to offer our customers quick turn-around services on our high-technology products such as flex and rigid flex PCBs.”

Visit I-007eBooks to download your copies of American Standard Circuits’ micro eBooks today:
The Printed Circuit Board Designer’s Guide… to Fundamentals of RF/ Microwave PCBs
The Printed Circuit Designer's Guide to... Flex and Rigid-Flex Fundamentals

About American Standard Circuits

American Standard Circuits (ASC) prides itself on being a total solutions provider, manufacturing quality rigid, metal-backed, RF/microwave, flex, and rigid-flex PCBs for the medical, automotive, industrial, defense, and aerospace markets in volumes from test and prototypes to large production orders. ASC has the expertise to provide a wide variety of technologies in a time-critical environment. Their qualifications include AS9100 Rev D, ISO 9001:2015, MIL-PRF 31032, MIL-PRF-55110, MIL-PRF-50884 certification and ITAR registration. In addition to manufacturing in the USA, ASC can transition and manage your PCB requirements to lower cost regions via its qualified supply chain of offshore partners. ASC also holds many key patents for metal bonding processes.

 

Share

Print


Suggested Items

Dan Gamota Discusses Flex and Alternative Substrates

03/14/2019 | Patty Goldman and Andy Shaughnessy, I-Connect007
As the VP of manufacturing technology and innovation for Jabil, Dan gave us his take on the current state of flex and alternative substrates and explained why modeling, automation, and process controls are likely to be key ingredients in the recipe for manufacturing non-FR-4 boards in the future.

The Smart Factory IQ Test

03/13/2019 | Nolan Johnson, I-Connect007
Let's see how prepared you are to talk about Industry 4.0. The following 12-question test will measure how much you know about smart factory concepts and philosophies. Since the concept of a smart factory is larger than the electronics manufacturing industry and encompasses the entire supply chain, the terms and concepts here are also more global in nature.

Chemical Recycling as Part of a Zero-effluent Strategy

03/06/2019 | Happy Holden, I-Connect007
Green manufacturing methodologies for PCBs are becoming a global shift. Green efforts have been underway in the European Union for quite some time. Likewise, in the United States, new PCB manufacturers are building zero-waste, zero-effluent facilities and gaining certification as such.



Copyright © 2019 I-Connect007. All rights reserved.