-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
EIPC Winter Conference, Day 1
March 19, 2019 | Alun Morgan, EIPCEstimated reading time: 10 minutes
At the EIPC Winter Conference in Milan on February 14–15, as the EIPC Chairman, I opened the first day of the conference in the customary style by welcoming sponsors and guests. Noting that it was Valentine’s day as well as the 150th anniversary of Mendeleev’s periodic table, I made a special Valentine’s day version of the table complete with heart-shaped elements. I went on to explain that 2019 was the International Year of the Periodic Table of Chemical Elements to mark Mendeleev’s achievement in categorising the element in groups defined by their atomic mass and valency.
I further explained that Mendeleev’s insight allowed him to infer the existence of as yet undiscovered elements and even to predict their properties. Mendeleev had postulated that “ekaaluminium” must exist in the gap in his table immediately below aluminium; we now know this as gallium, and his forecasts of its properties were spot on. I produced some of the soft, silvery blue metal gallium, explaining that it has a melting point of less than body temperature so that it would melt in your hand. Some delegates tested this to find it was indeed true, and despite warnings, many left with gallium-stained hands!
Moving back to the periodic table, I moved on to the alkali metal series, particularly lithium, which has an atomic weight of around seven and is responsible for the naming of the once lithiated drink “7-UP.” However, lithium is now better known for batteries, and my presentation swung, as it often does, towards automotive electronics. I discussed the energy density of different fuels and postulated that a hydrogen fuel cell/lithium battery hybrid vehicle may provide a good compromise of properties in the near future. I ended as I started with a special version of the periodic table. This time, the table produced by the European Chemical Society showed the elements relative to their availability. Many elements that we rely on have limited availability, which poses a future supply risk.
Morning Sessions
EIPC conference delegates are accustomed to hearing from industry sage and elder statesman Walt Custer in the first keynote presentation. But Walt is suffering an ongoing mobility issue, so he entrusted me to deliver the keynote on his behalf. My presentation began with the words, “Brace yourself for some sobering news.” I explained that due to significant geopolitical concerns, such as inflation, tariffs, trade disputes, and Brexit, global manufacturing growth is slowing, and most sectors of the world electronic supply chain were now expanding more slowly or even contracting.
Data showed that European electronics sectors, except instruments, medical electronics, and aerospace, declined in 4Q’18. Walt’s customary detailed analysis and reasoning followed, ending with my conclusion that we should expect slowing growth, especially in Europe, with trade disputes impacting long-standing regional alliances, causing electronic assembly to shift globally to countries less affected by tariffs. However, there was good news in that there are many new electronic products on the horizon, and 5G will offer exciting opportunities for the next decade.
Erkko Helminen of TTM Technologies delivered the next presentation. Helminen took the delegates through the 5G roadmap for PCB producers, detailing the impact of shrinking geometries, lower noise budget, complexity, tightening tolerances, and the lower total loss budget, showing how each element could be addressed to meet the new demands. He also described future self-driving electric vehicles as data centres on wheels that may require up to 1,000 chips per vehicle by 2020 and create a data requirement of up to 4,000 GB per day. The new technologies required covered not only new materials and process technologies but also environmental aspects as OEMs are expected to be more active in pushing supply chain efforts on environmental sustainability. Helminen’s presentation ended with a thought-provoking slide showing near-future PCB technology drivers and the many challenges that need to be overcome in their delivery.
The next session on new trends for the imaging of PCBs, conductors, and solder mask was moderated by Tarja Rapala-Virtanen, EIPC’s new technical director.
The first presentation by our hosts, Elga Europe, was delivered by Ilaria Pasquali and focussed on the development of a new dry film resist (DFR) with high sensitivity and high pattern definition working with new laser direct imaging (LDI) systems.
Pasquali explained that new requirements for tighter tolerances allied with high production capacity had rapidly increased the need for LDI capabilities with a reliable dry film resist. LDI machines require not only a more sensitive DFR but also one suited to the precise wavelength of the imaging laser which could be 405 nm or 375 nm. Moreover, by reformulating the DFR photoinitiator system, Elga had produced a wide portfolio of DFRs that allowed high productivity and high definition with high adhesion performance for the latest generation of LDI machines.
Next to present was Uwe Altmann of Orbotech who spoke about solder mask direct imaging. Altmann began by detailing the development of direct imaging technologies from the late 1990s to the present-day Orbotech Diamond machine. The presentation showcased the benefits of speed, low print energies, accuracy, robustness, and low operational costs. Altmann also explained that the imaging technology used three UV wavelengths—365, 385, and 405 nm—to match the wide variety of solder resist materials available. The presentation concluded with a description of integration within the smart factory whereby the imaging system can access part-specific data “on the fly” to minimise setup time and maximise accuracy and traceability.
Page 1 of 2
Suggested Items
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.