April 17: IPC Webinar on Weak Interface/Stacked Microvia Reliability


Reading time ( words)

For the upcoming IPC Wisdom Wednesday Webinar on April 17, the topic will be on weak interface/stacked microvia reliability concerns, to be presented by Dennis Fritz, IPC V-TSL-MVIA Co-Chair. The webinar is scheduled for 10:00–10:45 am CDT.

IPC has issued an industry warning on microvia reliability for high performance products. A number of IPC OEM member companies have presented examples of microvia failures that were not observed until after bare printed board fabrication, inspection and acceptance.

This free webinar will discuss why IPC has issued this warning and will provide an overview of this problem, with examples of the different conditions of concern. It will also cover how IPC has organized to address the problem, including sub-teams formed earlier this year at IPC APEX EXPO.

To gain a deeper understanding of this issue and how it may impact the design and testing of bare boards, register today by clicking here.

Share

Print


Suggested Items

Future Trends in Flying Probe Testing

11/29/2019 | I-Connect007 Editorial Team
Peter Brandt, director of sales for Europe and Japan at atg, sits down with Pete Starkey and Barry Matties, gives his views on market requirements and testing technologies, and explains how flying probe testing is becoming the industry standard at all levels of production—and in many cases, the only practicable solution.

EIPC Winter Conference—Speakers and Papers

11/25/2019 | Andy Shaughnessy, I-Connect007
I recently spoke with Kirsten Smit-Westenberg, executive director of EIPC, who is planning the EIPC winter conference set for February 2020 in Rotterdam, Netherlands. Kirsten discusses the conference topics, which are based around the needs of the next-generation electronic devices, and changes in fabrication solutions for PCBs, PCBAs, materials, and technologies.

Flex Standards Update With Nick Koop

11/21/2019 | Andy Shaughnessy, Design007 Magazine
This month, I interviewed Nick Koop—director of flex technology at TTM Technologies, a veteran “flex guy” and instructor, and a leader of several IPC flex standards committees. Nick provides an update for the committees he’s involved with and discusses some of the challenges that he sees as more designers enter the world of flex.



Copyright © 2019 I-Connect007. All rights reserved.