Aismalibar to Exhibit at 2019 Thermal Materials Summit


Reading time ( words)

Aismalibar has announced their first exhibition at this year’s Thermal Materials Summit in Los Angeles, California on May 2, 2019. The Thermal Materials Summit educates attendees on the latest advancements in thermal interface materials for professionals working in markets such as: aerospace, electronics packaging, automotive, semiconductor/ICs, LED cooling, motor controls, power supplies, discrete electronic devices, telecom and batteries.

Aismalibar will be showcasing the following products:

Cobritherm

Cobrithem insulate metal substrates are produced with different thicknesses of aluminum and copper and can be clad with different mixtures of dielectric layers to meet the ever-changing demands of the industry. The material can be produced in a variety of styles ranging from very thin layers as small as 50 microns to grant an excellent thermal impedance and up to 130 microns, which allows it to withstand high insulation in between the conductive metal layer.

Cobritherm Ultrathin

Cobritherm Ultrathin integrates an innovative ultra-thin dielectric layer that provides higher thermal performance, excellent working temperature and reduces thermal resistance. The new Cobritherm Ultra Thin 4W features a Tg of 180ºC and an 150ºC MOT.  Corbritherm Ultrathin offers industry leading thermal conductivity, strong MOT values, high Tg and low CTE which are the key elements for performance of MPCBs operating at high temperatures.

Fastherm

Fastherm is a unique product developed to achieve a faster thermal transition from the LED thermal pad to the heat sink through a pedestal technology. This superior thermal transition can be achieved by using the entire Cobritherm HTC product range with using a copper base. By using Aismalibar Cobritherm HTC range together with Fastherm technology, LEDs operate at a temperature 30ºC to 50ºC lower due to the direct thermal transition (pedestal) from the thermal pad to the heat sink.

Flextherm

Flextherm is a high technology thermal IMS for use in the production of conformable metal printed circuit boards that can be bent without compromising the initial dielectric strength between conductive layers. Its low thermal impedance allows the dissipation of temperature from the heating elements of a PCB into Flextherm’s metal core at an extremely efficient rate.

Multi-Layer PCBS

As thermal management becomes more challenging on multilayer PCBs constructions, Aismalibar has developed different substrates that can be combined to offer tailored solutions. These substrates are required in the case of complex boards with denser circuitry.

About Aismalibar

Founded in 1934 and based in Barcelona, Spain, Aismalibar manufactures high end copper and metal clad laminates for the printed circuit board industry. Aismalibar’s expertise lies in offering the best solutions to reduce the operational temperature of the printed circuit boards. Aismalibar materials ensure quality and reliability of all the products that incorporate them. Aismalibar has implemented a 100% proof test with 1-3KV (High Pot Test) to every Corbritherm IMS laminate that is produced. These materials minimize the use of supplementary fans or heat sinks, thus reducing production costs. Aismalibar now operates globally through several subsidiaries. Our priorities are, and have always been technological innovation and customer satisfaction.

Share

Print


Suggested Items

iNEMI’s PCB Roadmap Explained

05/01/2020 | Pete Starkey, I-Connect007
In an informative and enlightening webinar, iNEMI Project Manager Steve Payne was joined by Isola Group CTO Ed Kelley to explain, review, and discuss the details of the recently published “iNEMI 2019 Roadmap for Organic PCBs.” Pete Starkey provides an overview.

Improving Copper Distribution in Pattern Plating Using Simulation Software

04/28/2020 | Pete Starkey, I-Connect007
Technical Editor Pete Starkey had the opportunity to sit in on a webinar presented by Robrecht Belis, manager of the surface finishing business unit at Elsyca—a Belgian company specialising in the simulation of electrochemical processes.

IPC Europe Shares Technical Education and Standards Awareness

04/22/2020 | Pete Starkey, I-Connect007
Against a background of COVID-19 uncertainty and unprecedented challenges, but recognizing the vital importance of continuing to educate engineers and share the knowledge and skills required to manufacture boards and assemblies of the highest yields and reliability, the IPC Europe team hosted a technical webinar for the European electronics industry, featuring the expertise of two of I-Connect007’s regular columnists: Mike Carano and Jan Pedersen. Pete Starkey provides an overview.



Copyright © 2020 I-Connect007. All rights reserved.