Ventec's QMS at German Facility Re-Certified under ISO 9001:2015


Reading time ( words)

Ventec International Group Co., Ltd. has again achieved ISO 9001:2015 certification for its Quality Management System at its German facility, following an audit by an external certifying authority.

ISO 9001:2015 sets out the criteria for a quality management system and is based on a number of quality management principles including a strong customer focus, the motivation and implication of top management, the process approach and continual improvement. Ventec's facility in Kirchheimbolanden, Germany first achieved ISO 9001:2015 certification in 2016, which, supplements the company's main manufacturing site certifications of AS9100 Rev D for aerospace and IATF 16949:2016 for automotive certifications, and offers customers the highest possible quality standards through a fully controlled global supply chain.

"I am very pleased to receive this re-certification only three years after the first certification—and without any instances of non-conformity," said Frank Lorentz, Internal General Manager. "It recognizes our entire team's hard work and the success of our quality strategy for the benefit of all our customers."

"Ventec maintains robust quality management systems in all its facilities around the world, ensuring that all our customers receive reliable, consistent, good quality products and services from us through our fully controlled global supply chain," said Mark Goodwin, COO Europe & Americas.

About Ventec International Group

Ventec International is a premier supplier to the Global PCB industry. With volume manufacturing facilities in Taiwan and China and distribution locations and manufacturing sites in both the US and Europe, Ventec specializes in advanced copper clad glass reinforced and metal backed substrates. Ventec materials, which include high-quality enhanced FR-4, high-speed/low-loss- & high-performance IMS material technology and an advanced range of thermal management solutions, are manufactured by Ventec using strict quality-controlled processes that are certified to AS9100 Revision D, IATF 16949:2016 and ISO 9001:2015, and are backed by a fully controlled and managed global supply chain, sales- and technical support-network. For more information, visit www.venteclaminates.com.

Visit I-007eBooks to download your copy of Ventec micro eBook today:
The Printed Circuit Designer's Guide to...Thermal Management with Insulated Metal Substrates

Share

Print


Suggested Items

Avoiding CAF Failures at the IPC High-reliability Forum

07/31/2019 | Andy Shaughnessy, I-Connect007
Foresite CEO Terry Munson recently spoke with Andy Shaughnessy during the IPC High-Reliability Forum and Microvia Summit in Baltimore about his presentation on the causes of conductive anodic filament (CAF), the dangers of resin starvation, and what advice he'd give to PCB designers to avoid those types of failures.

Focusing on Surface Sensitivity for Reliability

07/26/2019 | Andy Shaughnessy, I-Connect007
At the recent IPC High-Reliability Forum and Microvia Summit, Customer Applications Scientist Elizabeth Kidd and Sales Engineer Alex Bien, both of BTG Labs, discuss with Andy Shaughnessy their presentation on the challenges of working with highly sensitive surfaces, such as the risk of contamination. They also talked about the various surface characterization techniques that BTG Labs uses to identify such contaminants.

A Guide to High-reliability PCBs from Design to Specification

07/24/2019 | Jeff Beauchamp, NCAB Group
Creating reliable PCBs is an outcome of considering all aspects that can affect reliability as early as possible in the design process. The further down the design process, the more expensive and risky it can be to fix. As they say, everything starts with the design. Because a good board design improves the reliability of the end product and lessens the risk of failure.



Copyright © 2019 I-Connect007. All rights reserved.