Looking Back on IPC’s First Annual Electronics Materials Forum


Reading time ( words)

This year, IPC tried something new and developed a technical conference to bring together industry professionals focused on materials development. Typically, the electronics manufacturing world tends to silo itself into design, PCB fabrication, components/semiconductor, assembly, and cleaning/coatings/reliability. IPC’s Electronics Materials Forum stretched through each silo and focused on the commonality of developing the materials we all use. Topics ranged from the bare copper used to start the PCB fabrication process all the way to coatings used to protect the finished assembly and many in between. This resulted in a program with widely varied topics that bred lively discussions between silos.

The conference chairs, Dennis Fritz and Don Dupriest, developed this idea over the years of hosting conferences focused on HDI and flex circuits. Once I started at IPC, we connected, and I thought the idea of bringing materials developers and users together in one place was different than any of the conferences I’d previously attended and a great opportunity to share strategies. In my previous jobs, I had been very specialized in one type of material (e.g., solder alloys), but the developments in other areas of the industry were quite inspirational because of their approach and influential based on their goals. When it comes to design/development, there is a lot to be said about learning by watching other products in their development process.

sandy-smith-audience-speakers-710.jpg

There were about 20 presentations over the three-day conference and lively conversation over the panel discussion and breaks. While every presenter had intriguing insights, I would like to mention just a few that inspired me. First, our keynote speaker Lenora Clark, MacDermid Alpha, addressed advancements in automotive technologies that are driving advancements in electronics due to the unique challenges posed by the high requirements and critical nature of auto safety systems. She pulled on the audience’s heartstrings, talking about that personal connection we all seem to develop with our cars over the years. These aren’t just vehicles that get us from place to place; many of us do grow attached (I know I can’t bring myself to part with my old car right now).

sandy-smith-Lenora_Clark_MacDermid-300.jpgFrom this idea, Lenora connected to some of the futuristic concepts related to autonomous vehicles that are becoming a reality in our lifetimes. Living room inspired interiors and infotainment systems that elevate the radios and eight-track players of the past to full navigational and informational powerhouses. The connectivity needed and the heightened requirements for these systems that operate all the time is a high bar to meet.

One example I remember really illustrated the point. Picture backup cameras or auto cameras that give any other view; they need to stay live all the time. The camera on your iPhone, for instance, could not do that because it would overheat. Also, there must be strategies to keep the lens clear, defogged, and focused. It’s not as easy as using devices from existing technologies, each one needs to be improved, and the use expanded. Lenora truly captured our hearts and minds and inspired us toward these goals, which require advancements in all facets of the materials we use in electronics.

The conference started with an overview from Dave Pinsky, leader of the Pb-free Electronics Risk Management (PERM) Council, which also met at this conference. This is a team of primarily defense and aerospace engineers who typically have not made the Pb-free transition along with the rest of the industry. It was interesting to hear the history of this group and the reasons they have continued to use tin-lead solder (and it’s not just because of tin whiskers).

The reliability required for a satellite, or some secret missile technology is so different than what is needed for any other application. This led into a discussion of the regulations that impact our material choices, presented by Kelly Scanlon, director of environment, health, and safety from IPC. Some of the drivers for change now come from material restrictions rather than new technological requirements.

There were also a couple of presentations about semi-additive processes. This is a different approach to building circuits that builds up the circuit instead of etching copper away to create the features. This enables much finer features and achieves better HDI designs. Thanks to Mike Vinson, Averatek Corporation, and Audra Thurston, Calumet Electronics Corporation, for illuminating the material advancements that made this possible as well as the details of early implementation of this concept. This is an emerging technology in its early adoption that could have real benefits and wide adoption soon.

sandy-smith-audience710.jpg

Another presentation I’ve continued to think about was from Dr. Kunal Shah, LiloTree, who talked about a new surface finish without nickel. His approach to developing surface finishes that cooperate with the soldering process with the goal of improved solder joint reliability was eye-opening. I’m certainly no expert on surface finishes, but I always thought they were primarily focused on protecting the copper surfaces and promoting solderability. It’s awesome to think about what could be achieved with cooperation between the soldering process and surface finish development.

Lastly, I was very inspired by Topher Anderson’s, ZSK Research and Training Center, discussion of how embroidery techniques can be used to create novel flexible circuits and wearable devices. This concept reaches outside of conventional electronics design to open a world of possibilities for how to integrate electronics into any surface that is not flat. Even better, he brought along lots of prototypes to experience hands-on. It’s techniques like this that expand the way we think about circuits and tap into our creativity.

Overall, the IPC Electronics Materials Forum 2019 was a fun, welcoming, and insightful experience that expanded my understanding of the materials available to us today. The common thread throughout the forum was the value of collaboration when facing the challenges of future technologies. I want to thank all those mentioned as well as the other speakers and attendees for being so engaged and engaging. Events like this are the highlight of my year. There are such exciting advancements happening in materials, and I hope you join us to expand the horizons next year!

Brook Sandy-Smith is the technical conference program manager at IPCAssociation Connecting Electronics Industries.

 

Share

Print


Suggested Items

Ledia 6 Direct Imaging System Offers Enhanced Speed and Precision

12/29/2019 | Pete Starkey, I-Connect007
Technical Editor Pete Starkey recently met with Ucamco’s Michel Van den heuvel, imaging product group director, to discuss the benefits of the Ledia 6 direct imaging system, which was introduced earlier this summer and features scan-alignment and improvements in registration and positioning accuracy.

The ICT 2019 Christmas Seminar

12/16/2019 | Pete Starkey, I-Connect007
Since 2016, the Institute of Circuit Technology (ICT) has held its northern area Christmas seminar at the Majestic Hotel in Harrogate—the elegant and historic English spa town in North Yorkshire. Pete Starkey provides an overview of this popular ICT event.

Future Trends in Flying Probe Testing

11/29/2019 | I-Connect007 Editorial Team
Peter Brandt, director of sales for Europe and Japan at atg, sits down with Pete Starkey and Barry Matties, gives his views on market requirements and testing technologies, and explains how flying probe testing is becoming the industry standard at all levels of production—and in many cases, the only practicable solution.



Copyright © 2020 I-Connect007. All rights reserved.