Ventec’s High-Speed/Low-Loss/High-Frequency Material Technology Takes Center Stage at U.S. Expos


Reading time ( words)

Ventec International Group Co., Ltd., a world leader in the production of polyimide and high reliability epoxy laminates and prepregs and specialist provider of thermal management and IMS solutions, will feature its brand new and enhanced set of high-performance, high-reliability high-speed/low-loss/high-frequency materials at the upcoming DesignCon and IPC APEX Expos. The Ventec technology team will be in Santa Clara (CA) at DesignCon on Booth #205 and key company executives will be joined by the US-team at IPC APEX EXPO in San Diego (CA) on booth #4434.

DesignCon, Santa Clara (CA) – Booth #205 (28-30 January)

With the rapid rise of 5G and sophisticated radar applications in automotive and other sectors, the demand and requirements for low loss and high frequency material is accelerating. On booth #205, visitors are invited to discover Ventec’s laminate and prepreg solutions that deliver the required superior electrical performance demanded by today’s 5G and radar application requirements.

The show will see the US-market launch and roll-out of tec-speed 30.0—Ventec’s latest ceramic filled high-frequency PTFE material range that offers the highest signal-integrity characteristics for the most advanced high-frequency systems such as 77~79 GHz automotive radar systems.

tec-speed 30.0 (VT-3703) offers:

  • Dk 3.0 with extremely low Df (0.0009)
  • DK-stability versus temperature
  • Lower in-plane thermal expansion

The current Dk 3.0 tec-speed 30.0 version will be supplemented by Dk 6.15 and Dk 10.2 versions in the first half of 2020, offering an even wider range of options for applications such as automotive radar, cellular base stations, power amplifiers & antennas, global positioning satellite antennas, patch antennas for wireless communication or power backplanes.

Also featured will be the tec-speed 20.0 range of high frequency laminates & prepregs designed to preserve signal integrity up to high-GHz frequencies. tec-speed 20.0 has extremely low 3.0-3.48 Dk and 0.002-0.0037 Df minimizing insertion losses, giving more freedom to optimize copper trace widths, spacing, and PCB thickness to suit your application.

IPC APEX, San Diego (CA)Booth #4434 (4-6 February)

Ventec will once again be exhibiting at IPC APEX on booth #4434 to present the company’s unique laminate & prepreg capability across a very wide range of applications and budgetsall supported by a fast and efficient global delivery promise through Ventec's fully controlled and managed global supply chain and world-class dependable technical support. The key focus will be:

  • The US-market launch of ‘autolam’ – a base material solutions set specifically curated for the diverse and unique requirements of automotive applications;
  • tec-speed 6.0: High-speed, high-frequency material technology for applications requiring great signal integrity and low-Dk benefits with high reliability. Ventec’s material formula also features high Conductive Anodic Filament (CAF) resistance to offer highest assurance of reliability in humid environments;
  • tec-speed 7.0 & 7.1: High-speed, ultra-low-loss multilayer materials that offer excellent signal integrity for extremely high-speed applications. By combining low dielectric constant (Dk) for highly efficient power transmission with low dissipation factor (Df) for minimum signal loss up to high bit rates, tec-speed 7.0 & 7.1 can handle all in-car networking from MOST (Media Oriented Systems Transport) and FlexRay to multi-Gigabit Ethernet;
  • tec-speed 20.0: Few substrate materials can match the high-speed signal-handling performance of this ceramic-filled hydrocarbon thermoset material series. tec-speed 20.0 combines unrivaled high-frequency performance (Dk 3.00-3.48 / Df 0.002-0.0037), superior loss characteristics and highest reliability particularly demanded by automotive and 5G applications.

For more information about Ventec's solutions and the company’s wide variety of products, please visit www.venteclaminates.com.

About Ventec International Group

Ventec International is a premier supplier to the Global PCB industry. With volume manufacturing facilities in Taiwan and China and distribution locations and manufacturing sites in both the US and Europe, Ventec specializes in advanced copper clad glass reinforced and metal backed substrates. Ventec materials, which include high-quality enhanced FR-4, high-speed/low-loss- & high-performance IMS material technology and an advanced range of thermal management solutions, are manufactured by Ventec using strict quality-controlled processes that are certified to AS9100 Revision D, IATF 16949:2016 and ISO 9001:2015, and are backed by a fully controlled and managed global supply chain, sales- and technical support-network. For more information, visit www.venteclaminates.com.

Share




Suggested Items

Plating on Silver: What’s Old is New Again

07/07/2022 | Denis Jacques, Technic Inc.
About three decades ago, immersion silver, a nitrate-based process, gained a lot of market share in the world of PCB final finishes. More economical than ENIG, flat, solderable, and conductive, it had everything going for it—everything but corrosion resistance in a harsh environment, that is. Champagne voids were also an issue, along with line reduction. But the worst drawback, the characteristic that made the part short over time, was creep corrosion. A build-up of copper sulfide salt that grows in contact with a sulfur-rich environment, heat, and moisture resulted in failures in the field. This was enough to scar the process for good.

EIPC Summer Conference 2022: Day 2 Review

06/29/2022 | Pete Starkey, I-Connect007
Örebro, Sweden on June 15 brought a bright and early start to Day 2 of the EIPC Summer Conference for those who had enjoyed the previous evening’s networking dinner, but had resisted the temptation to over-indulge or to carry on their long-awaited catch-up conversations with old friends into the small hours. All but a few were in their seats for 9 a.m., awake and attentive for Session 4 of the conference, on the theme of new process technologies, moderated by Martyn Gaudion, CEO of Polar Instruments.

EIPC Summer Conference 2022: Day 1 Review

06/28/2022 | Pete Starkey, I-Connect007
At last, a live EIPC conference and this time in the Swedish city of Örebro, “where history and contemporary culture converge,” a pleasant and convenient location for an event that included a privileged visit to the Ericsson facility in Kumla. Around 100 delegates made the journey and the Örebro Scandic Grand Hotel was an excellent conference venue for the June 14-15 conference.



Copyright © 2022 I-Connect007. All rights reserved.