Aismalibar North America to Exhibit at Strategies in Light


Reading time ( words)

AISMALIBAR is happy to exhibit at this year’s Strategies in Light trade show in San Diego, CA on February 11−13, 2020. Strategies in Light is the leading LED and lighting event in North America and has been for more than 15 years. Aismalibar North America encourages visitors to come and view cutting-edge thermal management solutions.

Strategies in light covers every aspect of lighting to provide a 360-degree view of the market and offers a platform where professionals can learn, collaborate, and connect face-to-face. More than 200 exhibitors will showcase the latest products, technologies and services.

Aismalibar will showcase their newest technology, COBRITHERM ULTRATHIN 4W – TG180ºC−150ºC MOT. An Insulated Metal Substrate (IMS) based on an aluminum cladding with an ED copper sheet on the opposite side, it contains an innovative 35mm ultra-thin polymer-ceramic dielectric layer of its own formulation, offering industry-leading thermal conductivity and high dielectric strength. It also offers strong MOT, High Tg and Low CTE values, which are the key elements for performance of the MPCB operating at high temperatures.

In addition, Aismalibar will feature THIN LAM HTC 3,2W - Tg180°C - Td 420°C - Low CTE. By THIN LAM allows for easy temperature reduction of your board allowing for an increase the power or the processor clock speed to obtain better performance on the same electronic design. FR4 PCBs with high density of thermal vias can be replaced by a standard double side PCBs constructed with THIN LAM without the needs of thermal vias.

Finally, Aismalibar will showcase the BOND SHEET PRE PREG 3,2W - Tg180ºC - Low CTE. Aismalibar’s high thermal BOND SHEET (Thermal Pre Preg) can be used for different applications on multilayer PCB and MPCB industry. By using BOND SHEET, dielectric layers become thermally conductive and are ideal to release heat from the electronic components located on the functional copper sideways and to the heatsink.

About AISMALIBAR

Founded in 1934 and based in Barcelona, Spain, Aismalibar manufactures high end Copper and Metal Clad Laminates for the Printed Circuit Board Industry. Aismalibar’s expertise lies in offering the best solutions to reduce the operational temperature of the Printed Circuit Boards. Aismalibar materials ensure quality and reliability of all the products that incorporate them.

Aismalibar has implemented a 100% proof test with 1-3KV (High Pot Test) to every IMS laminate that is produced. These materials minimize the use of supplementary fans or heat sinks, thus reducing production costs. Aismalibar now operates globally through several subsidiaries. Our priorities are, and have always been technological innovation and customer satisfaction.

Share

Print


Suggested Items

Catching Up With RBP Chemical and Schlötter

01/20/2022 | Dan Beaulieu, D.B. Management Group
It’s always great to see two very good companies form a mutually beneficial alliance. I was lucky enough to watch this particular strategic partnership come to fruition this year between RBP Chemical and Schlötter. I wanted to talk to both companies, so I sat down with Matthias Hampel, global executive representative-PCB and electronics at Schlötter, and Ernest Litynski, president of RBP Chemical Technology, to get the inside story.

Technology and Development Prospects for the European Marketplace

01/18/2022 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Tarja Rapala-Virtanen technical director of the EIPC who breaks down the current state of the European market and which technologies and market segments are seeing growth.

A Tour of the New Isola Factory: Investing in North America

12/23/2021 | Barry Matties, I-Connect007
Barry Matties recently toured Isola’s new 118,000-square-foot low-volume, high-mix manufacturing facility in Chandler, Arizona. The facility’s construction began in 2020 and, like many building projects, was delayed because of the COVID-19 pandemic. Building a new factory during the pandemic was certainly a challenge but the team persevered and the new greenfield facility is now operating to meet the needs of the North American market. During the tour, Barry met with Travis Kelly, Ed Kelley, Sean Mirshafiei, Jenny Inocencio, and Walt Niziolek. They covered a range of topics, including lab operations, hiring, the supply chain, R&D, and the concept of the new facility. The factory was designed to extensively utilize automation to improve efficiencies and, as Travis Kelly stated, “to de-risk the labor shortage issue.”



Copyright © 2022 I-Connect007. All rights reserved.