Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts



With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace. Listen to this in-depth roundtable today or download the mp3 to listen to it later.

Experts' Biographies:

Teresa Rowe, IPC’s Sr. Director of Assembly & Standards Technology, has over 25 years working for a defense contractor with responsibilities in quality engineering, training, and auditing functions in the production, maintenance and servicing environments. A liaison with the electronics industry in the development of IPC soldering and acceptance standards, she is also a Certified IPC Trainer (CIT) for soldering, electrical acceptance, cable and harness requirements, and rework and repair.

Graham K. Naisbitt began his career in 1969 at Socaltra, a French industrial engineering consortium. Later, he worked with French heavy-engineering giant Fives Group, and between 1979 and 1985, he served at Babcock International, a subsidiary of Claudius Peters in Germany. In 1979, the Naisbitt family created Concoat Ltd., to which Graham returned in 1985, making the logical step change from heavy engineering into the electronics industry as the U.K. distributor of HumiSeal. From 1979 to 2005, Concoat grew to become the manufacturing licensees of HumiSeal conformal coatings whilst also creating many of its own coating formulations. Concoat began to develop conformal coating application equipment that extended to both in-line dip and spray coating systems in 1982. By 2002, Concoat acquired Multicore Solders SPCID (Soldering Process Instrumentation Division) from Henkel KGaA, thus expanding its equipment manufacturing division. Following the sale of Concoat to HumiSeal, Gen3 Systems was created in 2005. Both of Graham’s sons have since joined the business as the third generation of the family.

GEN3Cover-300.jpgWith over 40 years in the electronics industry, Graham is a specialist in conformal coating, cleaning, SIR and CAF testing, electrochemical reliability issues, solderability, and process control matters; has authored over 100 technical papers; and given presentations around the world. He is also the current vice-chair of IPC 5-30 Cleaning and Coating Committee that embraces 15 test standard groups and a maintenance leader with IEC TC91 for SIR, CAF, ionic contamination testing, and solderability. Graham is chairman and CEO of Gen3 Systems, which continues to be a successful, family-controlled business. Graham has authored the book, The Printed Circuit Assembler's Guide to... Process Verification, which is available at the I-007eBooks site as a free download.

Jason Keeping is the Global Process Subject Matter Expert for Ruggedized Electronics within the Global Technology and Operations team at Celestica. He holds a B.A.Sc in Electrical Engineering from the University of Ryerson, is a Six Sigma/Lean Professional and a licensed professional engineer. Jason has focused his career on assessing the manufacturability and capabilities of conformal coating, potting, underfill chemistries & their interactions, dispensing technologies/processes and on assembly-level cleaning for the past fifteen years. Jason is the recipient of several awards, including the 2016 SMTA Excellence in International Leadership Award, the Shingo prize for Celestica’s site in Monterrey, Mexico in 2007, and has contributed to Celestica’s Frost & Sullivan awards in 2005, 2009, 2012 and 2013. Jason is the co-chair of the IPC-HDBK-830 handbook; author for conformal coating chapter of the Printed Circuits Handbook and was featured in the cover of Circuits Assembly in May 2008 and is currently the chair of the 5-30 Cleaning and Coating Committee within IPC. Most recently, Jason presented with Dave Hillman of Collins Aerospace; an industry wide baseline study, on conformal coating, supporting a J-STD-001 initiative with data and support of industry leading organizations. Jason has worked alongside Steph Mescheter of BAE Systems as a principle investigator on two of Celestica’s joint U.S. DoD Strategic Environmental Research and Development Project (SERDP) examining corrosion induced whisker growth.

Doug Pauls holds a B.A. in Chemistry and Physics from Carthage College, Kenosha, Wisconsin, and a B.S. in Electrical Engineering from the University of Wisconsin, Madison. He worked 9 years for the Navy, 8 years as Technical Director of Contamination Studies Labs, and 20 years at Rockwell Collins (now Collins Aerospace), in the Advanced Operations Engineering group, where he is a principal materials and process engineer. Doug was awarded the Rockwell Collins Arthur A. Collins Award in 2004. Doug is a long time IPC chairman and was awarded the IPC’s Hall of Fame Award in 2017. Doug is most notably known for his expertise in surface insulation resistance testing, cleaning and cleanliness assessment, conformal coatings, and how to qualify manufacturing processes. He has been a U.S. representative to ISO and IEC working groups on SIR, electromigration, and cleanliness reliability standards. He has participated in numerous national and international consortia on electronics manufacturing materials and processes. Doug has three adult children and has been happily married for 34 years and hopes the marriage survives the work-from-home provisions of the pandemic.

Related content:

Share

Print


Suggested Items

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.

This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend

04/03/2020 | I-Connect007 Editorial Team
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.

IPC APEX EXPO 2020 Attendees Speak: Travis Smith and Mindy Sanchez

03/16/2020 | I-Connect007 Editorial Team
"I’m seeing a lot of great manufacturers and different equipment that’s available in the market, as well as new, emerging technologies," said Travis Smith of Ball Aerospace. "I’m learning a lot more about some of IPC’s standards and committees as well. It has been a fantastic week of educating ourselves for manufacturing processes going forward. And the IPC booth has a wealth of information."



Copyright © 2020 I-Connect007. All rights reserved.