-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Happy Holden: ECWC15 Virtual Event a Success
December 15, 2020 | Happy Holden, I-Connect007Estimated reading time: 4 minutes
This is the first ECWC (Electronic Circuits World Convention) that I have not attended in person since 1978. To refresh your memory, these are held every three years on a rotating basis.
I always look forward to these events, not just because they include some of the best presentations you will hear, but also because they bring all my old friends together one more time. For the last three, however, I have been just one of only a dozen or so Americans to attend. This illustrates how much the electronics manufacturing arena has changed.
The HKPCA hosted this year’s conference and they kept up the fine tradition of collecting outstanding keynotes, nearly 60 technical presentations and myriad poster papers. HKPCA was also kind enough to provide English slides and translations. It is still possible to sign up and view the presentations. I have listened to 20 of the presentations, and hope to attend even more in the coming days as they are all worth watching.
I was honored to be selected as one of the keynote presenters and my presentation will be made available here at I-Connect007. We will write up others during 2021. Now that Pete Starkey has reported on the Day 2 keynote, I will report on the three keynotes from Day 1.
Dr. Hayao Nakahara
Leading off was an expert we all know, Dr. Hayao Nakahara of N.T. Information Ltd. Naka, as he is known, is in his 80s now, but still involved in our industry so he was the perfect choice to open this event. His topic was “Brief History of PCB and Technology Trends.”
Naka’s brief history starts with Dr. Paul Eisler, who is credited with inventing the first printed wiring board in 1936. But the technology did not become noted until it was secretly used to make proximity fuses for anti-aircraft shells during WWII. Then it grew slowly until the transistor was invented in the early ‘50s. Naka continued to detail the early milestones for the industry, most notably at Photocircuits in 1951. Naka worked for Photocircuits from 1965 to 1990. Photocircuits pioneered a lot of PCB technology, specifically PTH processes and additive circuits. They were the first to use palladium plating instead of gold for automotive applications as well as the first photoplotters for artwork. Naka highlighted the move to dry film photoresist, NC drilling, acid copper plating and alkaline etchants, followed by the development of microvias with laser drilling in the 1980s. First used by Hewlett-Packard for its “Finstrate” HDI boards, it was then used by Siemens for its large mainframe computers. Later, in the 1990s, IBM in Yasu, Japan started using the Ciba-Geigy photoimageable solder mask as a photo-dielectric, known as the SLC process. He ended his history report with TH wave soldering being replaced with SMT assemblies.
Once he introduced HDI processes, it further morphed into Japanese HDI processes such as ALIVH-PALUP-FACT/EV-MSF/VIL-bBit-Neo/Manhattan, and more, eventually becoming denser as SLP and IC packaging where the geometries began shrinking to require direct imaging for exposure and MSAP processes for traces and spacings. All of this allowed substrates to be created for Apple’s iPhones 10 to 12. It was a fun walk down memory lane, as I was around to see most of these changes.
Happy Holden
As the second keynote speaker I talked about the new VeCS: Vertical Conductive Structures. Hopefully, you have heard of this relatively new PCB technology from NextGIn’s Joan Tourné, which we’ve covered in PCB007 Magazine. If not, then this 40-minute talk summarizes the technology, its process advantages and applications as well as design rules, SI performance and reliability.
James Tam
The last keynote of the morning was “Adaptive PCB Design for Automotive” by James Tam of Bosch. This was a very informative presentation about Bosch, its businesses, and the future of transportation.
Bosch is a lot larger than I imagined, at 77.7 billion Euros annually and 398,150 employees worldwide. These all report into four business units:
- Energy/Buildings
- Mobility Solutions
- Industrial Products
- Consumer Goods
Mobility was the focus of this presentation. Technology trends for the future of mobility was the most interesting. In degree of automation:
- ACC/lane keeping support
- Traffic jam assist
- Automated parking
- Highway assist
- Highway pilot
- Urban automated taxi/travel
These are the requirements for PCBs to support their activity:
- Cost
- Better materials: > 160°C operation, CAF resistance to 2000 hrs.
- Higher currents: > 300 amps; ~6 to 12 oz coppers; integrated cooling; higher voltages, 1000V to 5KV
- Density: 75/75-micron T/S; 75-micron microvias; impedance control; freq. up to 77 GHz, 3-n-3 HDI stackups
- Semi-flex; via-in-pad; heat sink coins and pastes
- Reliability: Higher operating temperature for life 125°C to 140°C for passengers, 160°C for trucks
James ended the session with a recap of Apple’s substrate roadmap, from the original 2007 iPhone through the iPhone X, noting that none of the suppliers were from China. For China to survive in this arena, mainland Chinese fabricators need to meet these design parameters and catch up with Japanese, Taiwanese and Korean PCB fabricators because the automotive industry is on the same roadmap.
Suggested Items
Indium Experts to Present on High-Temperature, Lead-Free Solder Paste and High Reliability Liquid Metal Alloys Poster at ECTC
05/16/2024 | Indium CorporationIndium Corporation Research Associate Kyle Aserian will deliver a presentation at the 74th Electronic Components and Technology Conference (ECTC) on May 31, in Denver, Colorado.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.