Finding Process Improvement Opportunities in Training


Reading time ( words)

Nolan Johnson speaks with Leo Lambert of EPTAC about training the next generation out of high school and vocational schools, and how his company continues to improve processes, grow and adapt to changing requirements while fulfilling its mission to deliver technical certification training.

Nolan Johnson: Leo, what’s happening in the training space lately? Have our recent pandemic-driven restrictions changed how you deliver your product? Have your instructors found success in this environment?

Leo Lambert: They must all have the same interpretations from our end, so to speak. But to get our teachers involved in the new technologies, most of that happens in conversations with our customers. What’s going on? Well, the technology itself from assembling components on printed circuit boards and soldering those components in place is one thing, but the technology has improved relative to density of the product, such as—cellphones, for example, and all that is packed into that product. Then of course, there’s the technology of the components themselves.

We did an SMTA tour at one of the major military contractors in the area. Their boards were very low technology, but the technology of their product was based in their componentry. So, while this customer may not need new technology for board circuit design and assembly, we still try to bring them up to date, relative to the new processes being used in fabricating boards, new soldering technologies, and new metals to replace the high temp alloys with the new lower temperature ones that are starting to come out.

There are a lot of new soldering irons today that are much better than the previous ones, so we cover the use of those new tools. We’ve changed all our soldering irons, simply because it shows the students what they can do with the new equipment, and specifically since the components are getting smaller. Additionally, there’s a lot of new information that comes from the component manufacturers as to how to secure their componentry on printed circuit boards. They don’t want soldering irons at very high temperatures touching those components because they’re going to crack.

The intent is to be able to teach the new technology to the students. Initially we taught through-hole and hand-soldering techniques. We still teach those processes for through-hole technology, but since then, the component sizes have shrunk down to the size of a speck of pepper. The methodology of assembling those, and the specific paste required, has changed. We need to have conversations with the component and the material suppliers as to how to apply and use their materials. Our knowledge is developed with two conversations, one being with the clients who are in the training room and the process developments they’re doing. Secondly, it’s with the people making the material—paste and solder manufacturers like Indium, AIM and Alpha—and finding out what they’re doing, because they must be developing new products for the new technologies in process.

The other conversation is in the relationships from the cleanliness programs. There are a lot of issues going on with cleanliness. Historically these processes used solvents for cleaning printed circuit boards, and when aqueous cleaning came into vogue it created an entirely new process with new materials. The question then was, how are those materials going to be used and processed so they don’t harm the product or harm the individuals who are using them? That’s how we developed our knowledge of the new technologies that are evolving. As trainers we don’t get too involved with the electronic functionality portion of the circuits, but rather the assembly of those electronic circuits.

Johnson: What I’m hearing is that, while the basic skill set that you teach might be the same, it is also at the same time more complex because of so many factors. You have to be concerned with more things. I mean, back in the Dark Ages, it was through-hole, one kind of board, and one solder, and there was plenty of room to do that and if you didn’t learn how to solder, well, you were good enough. That’s not true anymore.

Lambert: Correct. One of the things that happened is the laminate materials changed. Today there are many microwave products being developed, and we need to know how to handle those versus the traditional FR-4 materials, and so on. We have to learn how to handle those new laminates, and then know how to teach that to the students.

To read this entire interview, which appeared in the January 2021 issue of PCB007 Magazine, click here.

Share




Suggested Items

Real Time with… IPC APEX EXPO 2023: Jesse Session Talks R&D at Taiyo

01/11/2023 | Nolan Johnson, I-Connect007
Nolan Johnson checks in with Taiyo America’s Technical Manager, Jesse Session, about the new and exciting developments cooking in Taiyo’s R&D department. The company’s groundbreaking inkjet solder mask product line is expanding to meet the needs of customers looking for updated color options that retain the same quality standards and reliability that have come to define Taiyo’s offerings.

Preventing De-wetting Defects In Immersion Tin Soldering

01/04/2023 | Britta Schafsteller, Atotech
Immersion tin is well accepted as a high-reliability final finish in the industry. Due to its excellent corrosion resistance, it exhibits major market shares, particularly in the automotive industry. During the soldering process, an intermetallic compound (IMC) is formed between copper and tin. One remaining concern in the industry is the potential impact of the IMC on the solderability of the final finish. In this article, typical failure modes in soldering immersion tin are described and correlated to potential root causes for the defects.

Taiyo: Reopening Europe for Solder Mask

12/19/2022 | Nolan Johnson, I-Connect007
Nolan Johnson and Stuart Down discuss Taiyo’s partnership with Ventec and how both companies are leveraging their expertise to blaze a trail into the European PCB market. Stuart shares his outlook on the market and the unique challenges posed by global political instability and supply chain constraints, as well as how Europe’s evolving chemical regulations have impacted solder mask formulation. With their sights set on ramping up manufacturing capabilities, Taiyo sees a secure path forward to establishing a sizeable market presence in this promising region.



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.