With Pluritec, it’s All About Automation


Reading time ( words)

Lino Sousa, vice president of sales with Pluritec, reviews the company’s specialist equipment ranges and discusses the benefits of automation of drilling, solder mask application and wet processing in small-batch, quick-turnaround PCB production.

Visit realtimewith.com now for all the interviews produced by I-Connect007 in partnership with the IPC at this year's event. Later this month, watch for Real Time with...IPC APEX EXPO 2021 Show & Tell 2021, our celebrated special annual post-show magazine. 

Watch this Real Time with… IPC APEX EXPO 2021 interview with Lino Sousa now.

Share

Print


Suggested Items

EIPC Technical Snapshot: 5G and Loss Minimisation

03/26/2021 | Pete Starkey, I-Connect007
Bringing a specialised technical area into sharp focus, this month’s topic was “5G and the understanding of loss minimisation at the PCB level,” with papers on dielectric material, copper foil, and modelling solutions. The webinar was moderated by EIPC board member Paul Waldner managing director of Multiline International Europa, who admitted that he had managed to get a haircut especially for the occasion!

PCB Requirements for E-Mobility

03/23/2021 | I-Connect007 Editorial Team
Nolan Johnson, Barry Matties, and Happy Holden speak with Christian Klein, section manager for PCBs in the automotive electronics division, about Bosch’s recent presentation on PCB requirements of the future in regard to automotive and electro mobility trends and challenges.

The Real Benefits of Inkjet Solder Mask

03/17/2021 | Real Time with...IPC
Shaun Tibbals, sales and marketing director at Electra Polymers, describes the technical, environmental and economic benefits of fully additive solder mask application by inkjet printing, now becoming accepted as the industry-standard technology for the future.



Copyright © 2021 I-Connect007. All rights reserved.