PCB Technologies Enhances Manufacturing Capacity

Reading time ( words)

PCB Technologies is enhancing its capacity with a new, state of the art, CNC routing machine. The machine, equipped with CCD cameras, ensures a high level of milling accuracy.

The cameras enable precise placement of the mechanical milling, hence maintaining tight tolerance, which reduces errors in the routing process. As a result, you get higher repeatability, decreased lead-time and improved accuracy when comparing the final product to the PCB’s original design.

The machine’s additional feature is a 2nd measuring system to allow greater depth control during milling (Z Axis) as well as highly accurate depth drilling and milling. If you add the machine’s high operation speed to the equation, you get higher production rate.




Suggested Items

A Conversation with Canice Chung, TTM Technologies

12/09/2014 | Barry Matties, I-Connect007
We had the opportunity to sit down with Canice Chung, Executive Vice President of TTM Technologies, Inc. to discuss the current trends and challenges of PCB Manufacturing in China.

A Conversation with Laurent Nicolet, Schmid Group

12/07/2014 | Barry Matties, I-Connect007
During the HKPCA & IPC Show 2014, Laurent Nicolet, VP - PCB Business Unit of Schmid Group took a few minutes to discuss the automation technology that was on display and share the changes he's seen in the China market.

Thin PCBs for Smart Phones: Technology and Reliability Considerations

11/19/2014 |
The next generation of smartphones will demand very thin multilayer boards to reduce product thickness. This paper shows three different manufacturing approaches which can be used for very thin, any-layer build-ups. The technological approaches are compared on reliability level--the any-layer copper filled microvia technology which is to be considered state-of-the-art for high-end phones and the ALIVH-C/G technology well established in Japan.

Copyright © 2021 I-Connect007. All rights reserved.