Volunteers Honored for Contributions to IPC and the Electronics Industry


Reading time ( words)

IPC presented Committee Leadership and Distinguished Committee Service Awards on May 9 at IPC’s SummerCom Standards Development Committee Meetings in Milwaukee, Wis. The awards were presented to individuals who made significant contributions to IPC and the industry by lending their time and expertise in the development of electronics manufacturing standards.

For his leadership of the D-55a Embedded Circuitry Guideline Task Group that revised IPC-7092A, Design and Assembly Process Implementation for Embedded Circuitry, Bhanu Sood, NASA Goddard Space Flight Center, earned a Committee Leadership Award. For their contributions to IPC-7092A, a Distinguished Committee Service Award was presented to Mumtaz Bora, Peregrine Semiconductor; Francesco Di Maio, GESTLABS S.r.l.; Gary Erickson, Sanmina Corporation; Dennis Fritz, Fritz Consulting; Ife Hsu, Intel; Manoj Kakade, pSemi Corp.; Rajesh Kumar, TTM Technologies; John Lauffer, TTM Technologies; Karen McConnell, Northrop Grumman; and Benjamin Piepgrass, Southwest Research Institute.

For his leadership of the B-11a 3D Electronic Packages Guideline Task Group that revised IPC-7091A, Design and Assembly Process Implementation of 3D Components, Dudi Amir, Intel Corporation, earned a Committee Leadership Award. For their contributions to IPC-7091A, Francesco Di Maio, GESTLABS S.r.l.; Ife Hsu, Intel; Russell Kido, Practical Components Inc.; Gustaf Martensson, Mycronic AB; Steve Martell, Nordson ASYMTEK; Jeff Schake, ASM Assembly Systems; Vern Solberg, Solberg Technical Consulting; Bhanu Sood, NASA Goddard Space Flight Center; and Pietro Vergine, Advanced Rework Technology Ltd., earned a Distinguished Committee Service Award.

For their leadership of the 5-24g Polymerics Standard Task Group that developed IPC-5262, Design, Critical Process and Acceptance Requirements for Polymeric Applications, a Committee Leadership Award was presented to Bob Cooke, NASA Johnson Space Center and Christina Rutherford, Honeywell Aerospace. For their contributions to IPC-5262, Tiberiu Baranyi, Flextronics Romania SRL; James Blanche, NASA Marshall Space Flight Center; Gerald Bogert, Bechtel Plant Machinery, Inc.; Brian Chislea, Dow Corning; Torrey Clark, Dow; Francesco Di Maio, GESTLABS S.r.l.; Lloyd Duso, Diamond-MT, Inc.; Hans-Otto Fickenscher, Vitesco Technologies Germany GmbH; Eric Harenburg, Boeing Company; Dave Hillman, Collins Aerospace; Joseph Kane, BAE Systems; Paul Kirpes, Los Alamos National Laboratory; Kent Larson, Dow; Hannah Locken, Boeing Company; Scott Meyer, UTAS/GOODRICH CORP. SIS; Garry McGuire, NASA Marshall Space Flight Center; Doug Pauls, Collins Aerospace; Stanton Rak, SF Rak Company; Jonathon Vermillion, Ball Aerospace & Technologies Corp.; Dan White, Collins Aerospace; and Paul Zutter, U.S. Army Aviation & Missile Command, received a Distinguished Committee Service Award.

For their leadership of the D-13, Flexible Circuits Base Materials Subcommittee that developed IPC-4202, Specification for Flexible Base Dielectrics for Use in Flexible Printed Boards, Steven Bowles, Lockheed Martin Corp. and Richard Wessel, DuPont Electronics & Imaging, earned a Committee Leadership Award. Contributions to IPC-4202 earned James Blanche, NASA Marshall Space Flight Center; James Daggett, Raytheon Company; Stefan Hanigk, Ariane Group GmbH; Lawino Kagumba, Blueshift Materials Inc.; Pierre Kuyl, Daikin America; Russ Shepherd, NTS Anaheim; and Jonathon Vermillion, Ball Aerospace & Technologies Corp. a Distinguished Committee Service Award.

For leadership of the 5-24A Flux Specifications Task Group that revised IPC J-STD-004C, Requirements for Soldering Fluxes, Tony Lentz, FCT Assembly Inc. and

Keith Sellers, NTS Baltimore, were presented with a Committee Leadership Award. A Distinguished Committee Service Award was presented to Jasbir Bath, Koki Solder America and Jennie Hwang, H-Technologies Group, for their contributions to IPC J-STD-004C.

Share




Suggested Items

Technica Heats Up ROI Discussion

05/17/2022 | I-Connect007 Editorial Team
The I-Connect007 Editorial Team speaks with Technica’s Frank Medina, Ed Carrigan, and Jason Perry about trending hotspots that provide the PCB fabricator a high return on investment (ROI). A theme that carries throughout the conversation is that traditional methods for calculating ROI are being replaced by models that include more qualitative factors.

EIPC Technical Snapshot: Supporting Autonomous Driving

05/12/2022 | Pete Starkey, I-Connect007
EIPC’s 17th Technical Snapshot webinar on May 4 focused on developments in automotive electronics, particularly on advances in the technologies required to support the evolution of autonomous driving. The team brought together two expert speakers to present their detailed views on topics encompassed within “CASE,” the acronym that appears to be taking over the automotive industry.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

05/06/2022 | Andy Shaughnessy, I-Connect007
This week, we have some M&A news from Summit Interconnect, and a variety of columns. Chris Bonsell discusses the lack of preventive maintenance planning in PCB manufacturing, and Kelly Dack lays out some solder mask guidelines for PCB designers. Duane Benson helps make sense of the quoting process in a time of 50-week lead times, and Dan Beaulieu has a great review of a book about how shareholder policies have caused many of the problems we see in corporations today.



Copyright © 2022 I-Connect007. All rights reserved.