I-Connect007 Editor’s Choice: Five Must-Reads for the Week


Reading time ( words)

This week we have quite a variety of articles for you. There has been so much electronics industry news coming out of Washington, D.C., that it can be hard to keep track of what’s going on. So, Editor Michelle Te compiled a handy-dandy reference guide to recent legislation news, including our exclusive coverage. We need to keep an eye on these senators and representatives. They’ve been talking about the importance of our industry for the past year, but this is an election year, after all. They’ve been known to say one thing and do another.   

We have some good news in the EMS segment, but it’s tempered with some not-so-good news. Isn’t that how it goes lately? We also have a great article by Cherie Litson on design techniques that can cut manufacturing costs, and an IPC call for participation in upcoming eco-design guidelines. We also featured an interview with ACE’s James Hofer about board shop pricing—is it time to raise your rates? James shares a few interesting ideas for board shops to consider when yet another supplier announces a price increase. 

North American EMS Industry Up 22.7% in July
Published August 26

There’s a bit of good news in the EMS world, with July EMS shipments up 22.7% year-over-year. A high book-to-bill ratio of 1.39 is a good harbinger. But orders were down YOY in the first half of the year. The supply chain is still a big challenge, but we’re seeing improvements every month. 

What’s Going On in Congress? Your Handy Guide to PCB Legislation Headlines
Published August 22

There’s been a lot of action in Washington, D.C. lately, as legislators and bureaucrats begin to understand the importance of our industry. At least they’re talking about supporting the domestic electronics manufacturing industry. Editor Michelle Te put together this handy compendium of the recent electronics industry news coming out of the capital of the free world.

IPC Issues Call for Participation: Help Shape the Future of Design for Environment Standards
Published August 22

IPC wants you! The 1-14 DFX Committee is reviewing IPC-2231A and plans to revise it within two years, and the group wants your input. They plan to create an eco-design for electronics guideline, so if you have experience in green PCB design or manufacturing techniques, get in touch with the committee.

Board Pricing Challenges and Opportunities 
Published August 24

As we all know, the price of everything is going up, and if you own a board shop, you’re at least considering raising your rates, if you haven’t already. We asked Accurate Circuit Engineering General Manager James Hofer to share his thoughts on board pricing—the challenges and the opportunities.

Design Tips for Lowering Costs of Fab and Assembly
Published August 25

Our friend Cherie Litson of Litson1 Consulting has a great article full of design tips for cutting fab and assembly costs. Some of these ideas may seem counterintuitive, such as adding layers and using higher-temp materials, but they may reduce overall costs in the end. Design is a game of trade-offs, isn’t it? Check it out.

 

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

03/24/2023 | Nolan Johnson, I-Connect007
It’s almost as if upheaval is the new normal. We often describe slow-moving but unstoppable change as moving in “geologic time.” But occasionally–like an earthquake–geology shifts suddenly. Here in my office, tracking the news of the industry, things are moving faster than geologic time, but more slowly than the jolt of an earthquake. The wave seems almost surfable, where before it seemed overwhelming. In this week’s list, we bring news from five different, high-vibration areas in our industry. If you read nothing else this week, these five items will keep you informed.

A Promising Future for Automation

03/21/2023 | Christopher Bonsell, Chemcut
This year, I had the great opportunity to come to IPC APEX EXPO in San Diego as a contributing member in Chemcut’s booth. Being an exhibitor is always interesting because you never know what you will learn or who you will meet. Truly, it seems that every IPC APEX EXPO is an eye-opening experience. This was the second show I attended, and last year I was amazed to see how in-depth and interconnected the electronics industry is. Seeing how many different companies contribute to manufacturing today’s core technology never fails to impress me.

The Summit View of the Marketplace

03/21/2023 | Nolan Johnson, I-Connect007
Investments, staffing, cybersecurity, and a peek into his crystal ball—John Vaughan, vice president of strategic markets at Summit Interconnect, sits down with Nolan Johnson to talk about it all. Business is good, by the way, thanks to Summit’s portfolio of military contracts, and he has sound advice to offer for smaller shops in the United States, and their real ability to make a difference in PCB fabrication.



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.