IMPACT 2014 - IPC on Capitol Hill


Reading time ( words)

Author's Note: The views expressed in the following recap of the IPC IMPACT 2014 event held June 10-11 are solely my own. In keeping with IPC’s long-standing commitment to open dialogue by and between its members, no direct quotes or personal views from any IPC members are referenced in this article.

Although I am a Washington, D.C. native and reside in the D.C. suburbs, I must admit it was difficult not to get excited in advance about spending two days in downtown Washington on Capitol Hill at IMPACT 2014, talking circuit boards with both politicians and my industry peers alike!

As an industry, we face many challenges and obstacles in our pathway to success and IPC’s IMPACT 2014 offered the opportunity to meet key members of Congress, policymakers and influencers, educate them about needed actions to strengthen the electronics sector and the overall economy and national security, and network with industry colleagues.

IPC delivered superbly on all accounts.

I last attended IPC Capitol Hill Day in 2011, and while that was an outstanding event as well, it was clear this time around that IPC had redoubled its commitment to public policy engagement. In January of this year, IPC’s Government Relations and Environmental Policy office moved from its former Arlington, Virginia, location into the heart of D.C. This prestigious Pennsylvania Avenue location is just blocks away from both the White House and Capitol Hill. No big surprise, as a government outreach and member advocacy presence here clearly pays dividends. This was reflected in the steady stream of high-level meetings with senators, representatives, and White House staffers that the IPC Government Relations team arranged for our IPC member delegation.

Read the full column here.


Editor's Note: This column originally appeared in the July 2014 issue of The PCB Magazine.

Share


Suggested Items

A Conversation with Canice Chung, TTM Technologies

12/09/2014 | Barry Matties, I-Connect007
We had the opportunity to sit down with Canice Chung, Executive Vice President of TTM Technologies, Inc. to discuss the current trends and challenges of PCB Manufacturing in China.

A Conversation with Laurent Nicolet, Schmid Group

12/07/2014 | Barry Matties, I-Connect007
During the HKPCA & IPC Show 2014, Laurent Nicolet, VP - PCB Business Unit of Schmid Group took a few minutes to discuss the automation technology that was on display and share the changes he's seen in the China market.

Thin PCBs for Smart Phones: Technology and Reliability Considerations

11/19/2014 |
The next generation of smartphones will demand very thin multilayer boards to reduce product thickness. This paper shows three different manufacturing approaches which can be used for very thin, any-layer build-ups. The technological approaches are compared on reliability level--the any-layer copper filled microvia technology which is to be considered state-of-the-art for high-end phones and the ALIVH-C/G technology well established in Japan.



Copyright © 2017 I-Connect007. All rights reserved.