Revolutionizing Equipment Repair & Service


Reading time ( words)

Guest Editor Steve Williams sits down with Randy Cook of CalTeks and Yash Sutariya of Alpha Circuits to talk about servicing equipment, especially foreign equipment not previously available in North America. With quality service now readily available, one can take advantage of considerably less expensive equipment being manufactured in China.

Watch the interview here.

Share

Print


Suggested Items

Streamlining Inspection and Verification

01/23/2020 | Barry Matties, I-Connect007
Barry Matties speaks with Vladi Kaplan, VP of marketing for CIMS, about the company’s newest verification station, the benefits operators will see from its colorized real-time video, and how it makes verification much faster and much more efficient for companies pushing 100% inspection.

Alex Stepinski: GreenSource Fabrication Update

01/22/2020 | Barry Matties, I-Connect007
Alex Stepinski gives an update on GreenSource, their acquisition of AWP, and their move to full production after some delays. Barry Matties and Alex also discuss automation and the difficulties in hiring in the U.S. and announces the decision to go to market with their recycling equipment in 2020.

Selecting the Proper Flex Coverlayer Material

09/06/2019 | Dave Lackey, American Standard Circuits
Coverlayers are polymer materials used to cover and protect the copper traces of the flex circuit product. There are a number of different options available for protecting the circuits, and they serve different design requirements in terms of cost, performance, and flexural endurance optimization. When specifying the choice, it is critical to call out not just the type of coverlayer material but also the thickness requirement. This can be very important in certain types of constructions, especially when a flex circuit will experience dynamic flexing during use.



Copyright © 2020 I-Connect007. All rights reserved.