Dynamic & Proto Circuits Names Matrix Electronics Supplier of the Year


Reading time ( words)

Dynamic & Proto Circuits Inc. (DAPC), today named Matrix Electronics Limited as their SUPPLIER OF THE YEAR. Each year, this award is granted to the Supplier who demonstrates the most excellent track record for Product Quality, Delivery and Supply Chain Resourcefulness.

“Demonstrating near flawless execution, Matrix serves as an integral part of the supply chain by providing next generation, high performance materials in support of our PC fabrication business,” stated Carl Hewitt, President of Dynamic & Proto Circuits Inc.

Matrix2.jpg“Matrix is honored to receive this award and is delighted to be part of DAPC’s Supply community. A special mention should go to our Matrix Operations and Customer Service Associates who perform consistently day-after-day”, says Ed Healy, CEO of Matrix Electronics Limited. “We have had a long standing relationship with DAPC and we are delighted with this acknowledgement.  Matrix supplies DAPC with a variety of key PWB raw materials on a JIT basis. As Panasonic’s exclusive North American Value-Added Distributor, we are committed to bringing these HSLL PWB Substrate technologies to each of our North American customers.”

About Matrix Electronics

Matrix was established in 1977 with the objective of providing quality raw materials to the North American Printed Circuit Board industry. With over 100 associates, the company is ready to serve its customers’ JIT requirements. The Technical Support team have experience in every PCB manufacturing process and are ready to serve. Our motto is simple, “Quality Products, Dependable People”.

For more information, visit www.matrixelectronics.com  

About Dynamic & Proto Circuits

DAPC is a leading supplier of high technology quick-turn bare PCB requirements. They are completely focused and dedicated to providing their customers with exceptional service and on-time delivery performance for all of their critical QTA needs. The 54,000 sq.ft. factory is located in Stoney Creek, Ontario Canada – 30 minutes from the US/Canada border. They are approved to IPC 6012 Class 1-3, Mil Spec 31032 & 55110, and are ISO 9001:2008 & AS 9100C certified. Their full breadth of technical capabilities and their extensive material stocking program allows them to provide fast lead times on even the most exotic of requirements, visit: www.dapc.com

Share

Print


Suggested Items

EPA, Industry Come Together in Visit to TTM Facility

07/18/2019 | Kelly Scanlon, director, EHS policy and research
IPC member TTM Technologies is proud to show off the new wastewater-treatment system at its Sterling, Virginia plant, which is helping to enhance the company’s pollution prevention and resource recovery performance.

Microvias: Links of Faith are Not Created Equally

07/18/2019 | Jerry Magera and J.R. Strickland, Motorola Solutions Inc.
Microvias connect adjacent copper layers to complete electrical paths. There are copper-filled microvias, which can be stacked to form connections beyond adjacent copper layers, and staggered microvias, which stitch adjacent copper layers with paths that meander on the layers between the microvias. This article discusses the various laser-drilled microvias and presents SEM photographs to begin the search for the root cause of weak copper interface.

Dissecting the IPC Regional Survey on PCB Technology Trends

07/15/2019 | I-Connect007 Editorial Team
Sharon Starr, Denny Fritz, and Mike Carano talk about the global 2018 IPC Technology Trends Report released early this year—the size of the survey, how it was conducted, the general findings, and regional differences. They also shared their takeaways and regional insights, and the industry outlook over the next five to 10 years.



Copyright © 2019 I-Connect007. All rights reserved.