Graphic USA Adds PCB Veteran Frank Castro


Reading time ( words)

Frank Castro, a highly experienced and well regarded expert of the PCB Industry has joined Graphic USA, a global manufacturer of high-technology printed circuit boards. As Production Manager, Mr. Castro will oversee all of the manufacturing operations and processes of Graphic USA, with special emphasis on the engineering and manufacturing of Flex, Rigid Flex Circuits and Flex Heater products for the Medical, Military, Aerospace, Automotive and Consumer industries.

Most recently, Mr. Castro spent 12 years at Rigid Flex International where he also served as Production Manager and served many Southern California PCB Companies beginning with his early days at Hughes Aircraft (now Raytheon). 

With the addition of Mr. Castro, Graphic USA continues on its path of long term investment in the US Market. With special expertise in the Flex Circuit and Rigid Flex Circuit Market, Graphic USA is able to offer the complete service from Application Engineering support to volume PCB manufacture. Graphic USA’s customers come from a wide range of industries including the Mil Aero, Medical and Commercial sectors.

Graphic USA is division of The Graphic Group, one of the most technically competent manufacturers of high-technology printed circuit boards. With headquarters in the UK and full service manufacturing facilities in the USA and China, The Graphic Group focuses on leading edge technology released to the most demanding international quality standards. HDI technology includes Rigid and Flex-Rigid Printed Circuit Boards with blind, buried, micro, copper and resin filled and stacked vias, sequential build-up, buried resistance and buried capacitance.

More Information can be found at www.graphic-usa.com  and www.graphic.plc.uk,

Share

Print


Suggested Items

Dissecting the IPC Regional Survey on PCB Technology Trends

07/15/2019 | I-Connect007 Editorial Team
Sharon Starr, Denny Fritz, and Mike Carano talk about the global 2018 IPC Technology Trends Report released early this year—the size of the survey, how it was conducted, the general findings, and regional differences. They also shared their takeaways and regional insights, and the industry outlook over the next five to 10 years.

An Examination of Glass-fiber and Epoxy Interface Degradation in Printed Circuit Boards

07/12/2019 | Bhanu Sood, Michael Osterman, and Michael Pecht, Center for Advanced Life Cycle Engineering
Multilayer organic laminates, which make up over 90% of the interconnecting substrates in electronics (standard FR-4 represents 85% of the substrates used for laminates), can develop a loss of electrical insulation resistance between two biased conductors due to conductive filament formation.

PCB Reliability: Via Design

07/12/2019 | Greg Ziraldo, Advanced Assembly
When considering the long-term reliability of a PCB, you must take into account any vias on your board. While an invaluable and essential part of board design, vias introduce weaknesses and affect solderability. This article will discuss vias, the potential concerns that are introduced into your board through their implementation, and how to minimize those concerns to acceptable levels.



Copyright © 2019 I-Connect007. All rights reserved.