Accomplish Change Together (ACT)


Reading time ( words)

Shifting strategies for selling PCBs and the materials to build them is the impetus for ACT. Insulectro’s Ken Parent and Jason Marsh spoke to I-Connect007 Publisher Barry Matties about the ACT approach—and how it is helping their PCB fabricator customers increase sales and OEMs to get better products.

Barry Matties: Ken, tell me a little bit about what ACT is.

Ken Parent: One of the biggest excuses I hear, which is a reality, is that fabricators can’t put a new material in because a print comes in, they get a purchase order with the print, and it says that they have to use XYZ material. Their reasoning is that they cannot change materials because the OEM specified something else on the print. Accomplish Change Together (ACT) means there is probably something in the offering that we have that could make them more competitive as a fabricator; it could make the end-use product more competitive from a technology or cost perspective.

Matties: How do you do that? How do you get the OEM to change?

Parent: Well, we go after it together. When we met at APEX this year, you saw that we had Freedom CAD there in our booth. That is another important equation. We’re bridging Isola and DuPont into the design community. We have to get it designed onto the print, so we bring those resources together. I met new designers at the IMS show that were interested in ACTing with us, and between those OEM requirements, the design community, the material supplier, the PCB or PE fabricators and Insulectro, we believe that together, we can accomplish that change on a print. ACT is all of the above: designer, fabricator, material supplier, and distributor.

Matties: So by the time it reaches the fabricator, though, it’s a print shop basically. All the decisions have been made. So now it’s just matching the requirement with the best manufacturer.

Jason Marsh: In many cases that is true, but it is not always the case. In the really cutting-edge stuff, and you see a lot of it the RF space, people are pushing the physics envelope. We’re trying to push material solutions that have been around for 25 or 30 years, and we are running out of runway, so to speak. They might come to the fabricator and say, “Okay, I’ve designed this. I’ve modeled this. Can this be done?” It might not even test the way it’s been modeled.

It might not be possible to do, or certainly won’t be with reasonable yields. You mentioned the unique nature of us being a distributor, which is one of the things that allows us to sit in the middle—not just of traditional PCBs, but we also have this whole space in the additive conductor area of printed electronics. We have a lot of conversations with the assembly shop. We understand the whole ecosystem and how it fits together, and we’re continuously educating ourselves in that space.

Read The Full Article Here

Editor's Note: This article originally appeared in the July 2015 issue of The PCB Magazine.

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

07/01/2022 | Andy Shaughnessy, Design007 Magazine
The summer is heating up, and our news this week is on fire, literally. Eltek has resumed making deliveries after a fire at their facility in Petach-Tikva, Israel. There’s never a dull moment in this industry. And we have some good news: EIPC’s conferences are now live events again, and Editor Pete Starkey is back in the saddle, bringing us a review of the two-day conference. I know Pete was getting tired of sitting around his house and watching these events on video.

EIPC Summer Conference 2022: Day 2 Review

06/29/2022 | Pete Starkey, I-Connect007
Örebro, Sweden on June 15 brought a bright and early start to Day 2 of the EIPC Summer Conference for those who had enjoyed the previous evening’s networking dinner, but had resisted the temptation to over-indulge or to carry on their long-awaited catch-up conversations with old friends into the small hours. All but a few were in their seats for 9 a.m., awake and attentive for Session 4 of the conference, on the theme of new process technologies, moderated by Martyn Gaudion, CEO of Polar Instruments.

Chemcut’s Robotic Solution

05/24/2022 | I-Connect007 Editorial Team
The I-Connect007 Editorial Staff spoke with Chemcut’s Jerry Reitz, and Atlantic Microtool’s Bruce Siemering and Neil Robinson about recent robotic automation advances, a specific robotic solution from Automata, and the changing factors tipping toward robotic automation in the current market.



Copyright © 2022 I-Connect007. All rights reserved.