New Battlegrounds Emerge for Conductive Inks and Pastes

Reading time ( words)

Core applications of PV and touch panels continue to grow demand, but new opportunities emerge in the form of wearable technology, circuit boards and structural electronics.

The new IDTechEx Research report Conductive Ink Markets 2015-2025: Forecasts, Technologies, Players finds that the market for conductive inks and pastes will reach $2.8bn in 2020, and thereafter $3bn in 2025. This report is the result of our close engagement with the conductive ink suppliers and users over the past ten years.

Growth is back in the PV sector

The photovoltaic market has traditionally dominated the conductive paste market. Here, firing type silver pastes are screen printed atop billions of photovoltaic silicon wafers. The PV market experienced a drastic consolidation period between 2007 and 2014, causing the paste market to dip and also to consolidate. Growth is however now back in the underlying PV sector, causing volume demand to grow despite the gradual annual decline in silver content per wafer. The previous big boys dominate sales although there is now renewed friction on the top with heightened risk of IP battles.

Copper to penetrate the touch screen markets

conductive_inks3.JPGThe touch screen market is growing even though the uptake of large-sized touch has lagged expectation. Here, low temperature silver pastes are screen printed as the edge electrodes. A big trend is towards narrowing the bezel even more in order to make thinner bezels around screens which consumers desire. This trend will ultimately push screen printing beyond its limits in the long term and will open door for other printing methods.

There is also continued pressure to switch to copper based inks to reduce cost. Here, the suppliers want to offer the same for less. There has been tremendous effort but copper is far behind silver in its technology learning curve therefore technical challenges still need to be ironed out. However, IDTechEx expects that the rising sales figures for innovative sintering machines (machines that prevent copper oxidization) to finally open the door for the flow of copper sales. This is a space to closely watch.

Fresh enthusiasm for silver nanoparticles

The market for silver nanoparticles remain small but the mood is changing. Larger companies have entered the scene, helping change a landscape previously in exclusive possession of small players. Many firms have left the scene but most have been replaced with fresh stock.

Silver nanoparticles initially set out to offer more for less compared to traditional pastes but they turned out to be less for more. There is now however a sense that they finally offer more for same. The prices have fallen but $/kg manufacturing cost will always remain many times higher due to the need to keep the nanoparticles de-aggregated throughout the chemical growth process.

The $/Kg will matter less, however, when you need less material. This is why higher silver prices would have certainly accelerated the uptake as it would force a more efficient use of silver. We feel that there is a robust and diverse application pipeline emerging, and success in one will transform the fortune of the industry. These are critical years for this industry as suppliers seek to evolve out of custom development work with select customers to large scale volume sales.

The new battlegrounds

A range of emerging application now capture all the attention. We will briefly discuss each in turn here. For more details please email us or refer to our report Conductive Ink Markets 2015-2025: Forecasts, Technologies, Players

Wearable electronics

Wearable electronics is now trending and so the topic is on all suppliers' agenda including conductive ink ones. Many detect an opportunity in creating speciality inks that can be washed and stretched. The idea is that the printed inks can act either as an interconnect or a piezoresistive sensor on textiles.

We are at the beginning of the beginning. At this stage, we witness many electronic-on-textile product concepts being quickly prototyped and marketed by nimble, small players. Many suppliers now set up partnerships with these small players to test out the markets. This sector is however far from mature and inks suppliers need to change formulation so their inks survive tough washing, stretching and adhesion tests. The race is on but all ink suppliers are keen to enable e-textile possibilities. Images from left to right: Bebop Sensors, Mimo, adidas

Printed circuit boards

Using printing to rapidly prototype PCBs is being given a second chance. This time the market is emerging at two extreme ends: the hobbyist as well as the professional. In the former, small and simple machines create crude and simple (single and rarely double sided) circuits with low conductivity and wide tracks (e.g. 500 um). These machine makers raise money using crowd funding and price their products at the low end. We expect this trend to soon fizzle out because the incumbent, a low priced CNC machine, offers much more for less so chances are that the substitute will not succeed. The consumable costs for printing will be a further handicap as will be their inability to cost effectively create a continuous ground plane.

The professional end is a different story. Here, complex inkjet printing systems are being engineered that can deposit alternating layers of silver nanoparticle and insulting inks, thereby creating multi-layer PCBs with narrow tracks compatible with most SMDs. The target market here is rapid prototyping or low volume manufacture of boards with 4 layers or higher (etching PCBs gets more tricky with increasing layer numbers). This approach seeks to reduce prototyping turnaround time for multi-layer circuits and enable keeping all the circuit IP in house.

The value proposition seems strong but major question marks remain. The printed PCB may not have the same high frequency behaviour as the etched one. The turnaround time issue is only acute for 5 layers or more, and most importantly the technology itself is not yet market ready and we can verify if it will do what it says in the tin.

Combining printed electronics and 3D printing

IDTechEx Research now also detects a trend towards combining printed electronics and 3D printing. The idea is to weave electronics into 3D printed objects. Various approaches are being developed in parallel. Conductive filaments are improving but they remain barely conductive, not even coming close to levels that enable useful circuits. Aerosol deposition is making good progress but it is at its best for depositing on the final surface. Standard printed conductive inks have a high sintering temperature, often above the glass temperature of 3D plastic whilst UV curing can have many side effects on polymer properties. So... different approaches, all with world to be done. These are also covered in the report From 2D to 3D Printed Electronics 2015-2025.

Structural electronics

Molded electronics is a subset of structural electronics, a grand trend that sees electronics disappear into body of objects (see Structural Electronics 2015-2025: Applications, Technologies, Forecasts). Here, the idea is to put in the electronics on plastic films so they can be molded or thermoformed into 3D shapes. This way the electronics is part of object and not an extension of it.

This approach is best for manufacturing high volume but low complexity circuits. Indeed, molded electronics was once on the cusp of a fantastic success story when it was used to create a thin and sleek car overhead controller. Sadly Ford pulled back the parts soon after its launch.

The sector is not dead however and we expect it to make a comeback soon. The material armory is expanding. Here too the ink technology is still not mature as inks have to withstand thermoforming and extreme stretching conditions, there are therefore problems to solve but the big marketing challenge will ultimately be developing applications that steer well away from simple low-cost mechanical switches.

The conductive ink and paste remains one of the largest and most dynamic sectors in printed electronics. It is often perceived that this technology is old hat, but the industry keeps itself very dynamic by offering new products and by findings new markets. The technology is not stale even in the more mature sectors like PV as here too cut-throat competition is pushing through rapid incremental product improvements. The strong pipeline of newly emerging market outlets also creates new requirements and opportunities. Next generation technologies like copper or nano inks also progress as the existing incumbent paste technologies are thought to soon plateau, although they so far always managed to stay ahead of the game.

The IDTechEx report on Conductive Ink Markets 2015-2025: Forecasts, Technologies, Players will help you assess how the conductive ink/paste technologies compare and will evolve, how the different players are positioned, and how each market will grow in the future. The world's largest event printed electronics - Printed Electronics USA, held on November 18-19 will cover the technologies and applications in questions. See  for more details.



Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

01/07/2022 | Nolan Johnson, I-Connect007
No matter how you look at it, we’re already off to a roaring start in 2022. Here on the West Coast of the U.S., heavy and persistent rains are doing what they can to fix years of drought through the southwest United States. The eastern seaboard is seeing plenty of rainy weather as well. As they say on the salt containers: When it rains, it pours. That adage is rather true in the news of the industry this week. Therefore, my must-reads include a celebration of longevity in business, the launch of our next space telescope, and the sale of equipment for the printing of electronics. On a more circumspect note, we also bring you the IPC’s report on rising material and labor costs, and an article on cybersecurity.

Jackie Mattox Keynotes Women in Electronics Reception

12/22/2021 | Alicia Balonek, IPC
Named one of the Top 21 female influencers in 2021, Jackie Mattox started her career in the electronics industry during her college years at a small rep firm in Southern California, where she worked her way into the roles of sales and distribution manager and took a passionate interest in strategic key account management. Jackie graduated from California State UniversityNorthridge with a Bachelor of Arts degree in communication/journalism. Jackie has always had a heart for people and especially for women’s issues, along with a dedication to personal and professional leadership development.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

12/17/2021 | Andy Shaughnessy, Design007
I’m starting to get more and more out-of-office replies. Are you reading this on your phone while standing in line at Best Buy? But if you’re reading this, here’s to you! It’s been a pretty good year—much better than last year, though that’s a fairly low bar to clear. It’s a mixed bag this week, with news about trade shows, along with articles and interviews focusing on everything from education to methods for dealing with supply chain issues by staying flexible and taking action earlier in the process.

Copyright © 2022 I-Connect007. All rights reserved.