German PCB Market Posts Slight Drop in 1H 2015

Reading time ( words)

Germany's PCB sales in the first half of 2015 saw a 1.1% drop compared to the same period last year, according to the ZVEI PCB and Electronic Systems. On a monthly basis, June sales were up by 10.5% from May.

Orders went up by 6.1% in June this year compared to last year; but for the first six months of the year, orders were down by 2.6% compared to the same period in 2014.

Book-to-bill ratio reached 0.98 in June, and 1.02 in 1H 2015.



Suggested Items

Nano Dimension Details New DragonFly LDM

08/21/2019 | Dan Feinberg, Technology Editor, I-Connect007
Dan Feinberg talks with Nano Dimension CEO Amit Dror about the new DragonFly LDM 3D printer technology announced by the Israeli company on July 24, 2019, aimed at increasing machine uptime and moving forward from prototyping to higher production volumes.

How to Feed Test Data Back to Engineering for Process Improvement

08/01/2019 | Todd Kolmodin, Gardien Services
Some people think of the PCB manufacturing process as a black box: design data goes to the manufacturer (fabrication house), and magically, the finished PCB is produced. While it may have been like that in the past, in actuality, fabricating PCBs today is quite a ballet of processes.

Avoiding CAF Failures at the IPC High-reliability Forum

12/31/1969 | Andy Shaughnessy, I-Connect007
Foresite CEO Terry Munson recently spoke with Andy Shaughnessy during the IPC High-Reliability Forum and Microvia Summit in Baltimore about his presentation on the causes of conductive anodic filament (CAF), the dangers of resin starvation, and what advice he'd give to PCB designers to avoid those types of failures.

Copyright © 2019 I-Connect007. All rights reserved.