Rogers to Exhibit at European Microwave Week 2015


Reading time ( words)

Rogers Corporation will be a major participant in the conference and product exhibition segments of Europe’s largest trade show devoted to RF/microwave technology and applications-- European Microwave Week 2015 (EuMW 2015) (www.eumweek.com). Scheduled for September 6-11, 2015 at the Palais des Congres, Paris, France, EuMW 2015 includes the 45th European Microwave Conference, the 10th European Microwave Integrated Circuits Conference (EuMIC 2015), the 12th European Radar Conference (EuRAD 2015), and a large exhibition floor.

Rogers at Booth 263

Rogers Advanced Connectivity Solutions representatives will be available at EuMW 2015 Exhibition Booth 263 Sept. 8-10 to greet visitors and assist with advice and design information concerning Rogers’ high-performance printed-circuit-board (PCB) materials, including RO3003™ laminates. RO3003 laminates have tightly controlled dielectric constant (3.04+/-0.04 at 10GHZ) and very stable dielectric constant performance over temperature (-3 ppm/°C from -50°C to 150°C).  The RO3003 PTFE-ceramic composite resin system enables very low dielectric loss (0.0010 at 10GHZ), and laminates can be purchased with rolled copper to further enhance PCB insertion loss performance.  Due to its excellent electrical properties, RO3003 laminates are often chosen for millimeter wave applications such as 77-79GHZ automotive radar sensors and 60GHz point to point backhaul applications.  

Rogers + Arlon

Visitors to the exhibition booth can also learn about the recent acquisition of material supplier Arlon, LLC. The Arlon business is well established as a top supplier of high-frequency circuit materials and engineered silicone materials and is an excellent strategic fit with Rogers Corporation’s PCB materials and high-performance elastomers. The acquisition adds to the materials diversification and expertise at Rogers and benefits customers with a significantly expanded choice in high-performance materials.

Rogers’ John Coonrod to Present at Tech Conference & MicroApps

John Coonrod, Technical Marketing Manager at Rogers Advanced Connectivity Solutions & author of the popular ROG Blog series will make one presentation during the Microwave Conference and three MicroApps presentations on the exhibition floor. The conference presentation, scheduled for 8:30-8:50 AM on Wednesday, September 9, will be of interest to designers and users of high-frequency filters and PCB material specifiers: “Applied Methodology for Harmonic Suppression of Microstrip Edge Coupled Bandpass Filters Using Composite Circuit Materials.”

Coonrod will also deliver three different MicroApps presentations during EuMW 2015:

  • “Composite Circuit Materials Used to Suppress Harmonic Modes in Microstrip Edge Coupled Filters” (Tuesday, September 8, 13:00)
  • “Microwave PCB Structure Selection: Microstrip Versus Grounded Coplanar Waveguide” (Wednesday, September 9, 14:30)
  • “PCB Fabrication Influences on Microwave Performance” (Thursday, September 10, 15:30)

 Rogers Corporation is a Founding Member of RF Energy Alliance

The RF Energy Alliance (RFEA) is standardizing, promoting and educating audiences in solid-state RF energy—a clean, highly efficient and controllable heat and power source. Members envision a fast-growing, innovative marketplace built around this sustainable technology, contributing to quality of life across many applications. As a founding member, Rogers Corp. will host RFEA’s Dr. Klaus Werner as he presents the state of the Alliance at 11:30 on Wednesday, September 9, and at 11:30 on Thursday, September 10 at booth 263.

About Rogers Corporation

Rogers Corporation (NYSE:ROG) is a global technology leader in engineered materials to power, protect, and connect our world.  With more than 180 years of materials science experience, Rogers delivers high-performance solutions that enable clean energy, Internet connectivity, advanced transportation and other technologies where reliability is critical. Rogers delivers Power Electronics Solutions for energy-efficient motor drives, vehicle electrification, and alternative energy; Elastomeric Material Solutions for sealing, vibration management, and impact protection in mobile devices, transportation interiors, and performance apparel; and Advanced Connectivity Solutions for wireless infrastructure, automotive safety, and radar systems. Headquartered in Connecticut (USA), Rogers operates manufacturing facilities in the United States, China, Germany, Belgium, Hungary, and South Korea, with joint ventures and sales offices worldwide.

Share

Print


Suggested Items

Communication, Part 4: The Top 5 Causes of Engineering Delays

10/25/2019 | Steve Williams, The Right Approach Consulting LLC
In Part 4 of this series on how PCB fabricators and designers can better communicate, Bob Chandler from CA Design and Mark Thompson from Prototron Circuits address the top five causes of engineer delays.

Why Designers Need to Be at the SMTA Additive Electronics Conference

10/18/2019 | I-Connect007
In a recent interview, Kelly Dack and Tara Dunn (Omni PCB president and conference co-chair) discussed why designers need to attend the SMTA Additive Electronics Conference. Tara will also be attending and moderating a panel discussion at the conference.

Additive Electronics Conference Set for October 2019 Debut

10/15/2019 | Kelly Dack
Kelly Dack and Tara Dunn talk about the upcoming conference "Additive Electronics: PCB Scale to IC Scale" on October 24, 2019, hosted by SMTA in San Jose, California, and why it's an important event for people to attend—especially those involved in the design process.



Copyright © 2019 I-Connect007. All rights reserved.