AS9100 Rev C 2016 Audit Success at Ventec's UK Facility


Reading time ( words)

Ventec International Group is proud to announce that its European Headquarters in the United Kingdom continues to be fully accredited to AS9100 Revision C, in accordance with the Aerospace Supplier Quality System Certification Scheme. Re-certification was granted after successfully passing the 3-year audit of the facility's quality management system with zero non-conformances.

PCB fabrication customers servicing the aviation, space and defense industries can continue to rely on Ventec's fully accredited supply chain for high reliability laminates and pre-pregs. From manufacture through fabrication and delivery, Ventec's high quality product portfolio of polyimides, high reliability FR4 and its latest 'tec-speed' range of high speed/low loss materials are all covered by the accreditation.

Mark Goodwin, COO Europe and USA commented: “Our accredited supply chain complements the AS9100C quality management systems of our PCB customers, enabling aerospace OEMs to engage Ventec as a strategic partner in their safety critical supply chains, based not just on the proven performance of our materials but on our commitment to managing delivered quality to the highest standards.”

For more information about Ventec’s solutions and the company’s wide variety of products, please click here.

About Ventec International Group

With volume manufacturing facilities and HQ in Suzhou China, Ventec International specializes in advanced copper clad glass reinforced and metal backed substrates for the PCB industry. With distribution locations and quick-turn CCL manufacturing sites in both the US and Europe, Ventec International is a premier supplier to the Global PCB industry.

Share

Print


Suggested Items

Microvias: Links of Faith are Not Created Equally

07/18/2019 | Jerry Magera and J.R. Strickland, Motorola Solutions Inc.
Microvias connect adjacent copper layers to complete electrical paths. There are copper-filled microvias, which can be stacked to form connections beyond adjacent copper layers, and staggered microvias, which stitch adjacent copper layers with paths that meander on the layers between the microvias. This article discusses the various laser-drilled microvias and presents SEM photographs to begin the search for the root cause of weak copper interface.

Dissecting the IPC Regional Survey on PCB Technology Trends

07/15/2019 | I-Connect007 Editorial Team
Sharon Starr, Denny Fritz, and Mike Carano talk about the global 2018 IPC Technology Trends Report released early this year—the size of the survey, how it was conducted, the general findings, and regional differences. They also shared their takeaways and regional insights, and the industry outlook over the next five to 10 years.

An Examination of Glass-fiber and Epoxy Interface Degradation in Printed Circuit Boards

07/12/2019 | Bhanu Sood, Michael Osterman, and Michael Pecht, Center for Advanced Life Cycle Engineering
Multilayer organic laminates, which make up over 90% of the interconnecting substrates in electronics (standard FR-4 represents 85% of the substrates used for laminates), can develop a loss of electrical insulation resistance between two biased conductors due to conductive filament formation.



Copyright © 2019 I-Connect007. All rights reserved.