Pro-Tech Expands Scope of Military Qualification MIL-PRF-31032

Reading time ( words)

Pro-Tech Interconnect Solutions has announced that the company has expanded the scope of its key military certification, MIL-PRF-31032/MIL-PRF-55110. The newest capabilities are the result of ongoing capital investment in leading edge technology as well as continuous advancements to our quality management and production capabilities. Several increased capabilities of note include maximum number of layers to 16, minimum mechanical hole size of .0059", aspect ratio of 15:1, and 5 mil laser vias with 1:1 ratio utilizing full via fill copper. 

About Pro-Tech Interconnect Solutions, LLC.

Pro-Tech is a Minnesota-based premier manufacturer of high-reliability printed circuit boards for the military, aerospace, medical, industrial, homeland security and avionics industries focusing on prototype to medium volumes including HDI quick turn and heavy copper demands.  Pro-Tech’s current certifications include ISO 9001:2008, AS9100C, ISO 13485:2003, MIL-PRF-31032 along with ITAR registration.

07/31/2019 | Andy Shaughnessy, I-Connect007

Foresite CEO Terry Munson recently spoke with Andy Shaughnessy during the IPC High-Reliability Forum and Microvia Summit in Baltimore about his presentation on the causes of conductive anodic filament (CAF), the dangers of resin starvation, and what advice he'd give to PCB designers to avoid those types of failures.

07/26/2019 | Andy Shaughnessy, I-Connect007

At the recent IPC High-Reliability Forum and Microvia Summit, Customer Applications Scientist Elizabeth Kidd and Sales Engineer Alex Bien, both of BTG Labs, discuss with Andy Shaughnessy their presentation on the challenges of working with highly sensitive surfaces, such as the risk of contamination. They also talked about the various surface characterization techniques that BTG Labs uses to identify such contaminants.

07/24/2019 | Jeff Beauchamp, NCAB Group

Creating reliable PCBs is an outcome of considering all aspects that can affect reliability as early as possible in the design process. The further down the design process, the more expensive and risky it can be to fix. As they say, everything starts with the design. Because a good board design improves the reliability of the end product and lessens the risk of failure.