-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Improved Thermal Interface Materials For Cooling High-Power Electronics
March 31, 2022 | Jeff Brandman, Aismalibar North AmericaEstimated reading time: 2 minutes
Heat has been a significant concern in electronics since the beginning of the electronics age when hot glowing vacuum tubes were first used to receive and transmit data bits. The transistor and integrated circuit effectively solved that basic problem, but increases in integration resulted in increased concentration of heat, exacerbated by relentless increases in operating frequency. While improvements in electronics technology have been able to mitigate many thermal issues at chip level thanks to improved semiconductor designs devised to operate at lower voltages (thus requiring less energy) the thermal management challenge continues to vex electronic product developers. Moreover, with ever denser heterogeneous integration solutions now being introduced, this is expected to remain a concern to be addressed for the foreseeable future. Thermal engineers have long known that thermal energy must ultimately be “returned to the air” but getting it there in an efficient way is of great importance. They know also that there are but three basic ways of removing heat from a system: conduction, convection, and radiation; of these, conduction is by far the most efficient.
In the manufacture of printed circuits, especially those used in high power applications, the board itself becomes an obvious potential means of helping to remove heat. However, the choice must be made carefully to assure that it fits well into the scheme of traditional manufacturing, as the materials required must not only remove heat but must also maintain the high electrical insulation properties that are vitally important to printed circuit designers and the products they develop. This has been a primary focus of Aismalibar for some time and the company has accordingly developed a family of new thermal interface material (TIM) technologies designed specifically for printed circuits. The unique materials the company has developed have thermal conductivities up to 3.2 W/mK (tested according to ASTM D5470) and high electrical insulation properties of up to 6 KV AC. (For comparison, nominal laminate materials have thermal conductivities of 0.25 W/mK.)
Concept Model for Thermal Management Chain in Power Electronics
Thermal interface materials are used by design in power electronics modules to facilitate the transfer and dissipation of the heat generated by the active and passive power components on the printed circuit board by enabling efficient transfer of heat though a cooling chain to a downstream cooling element, such as a heat spreader or heat pipe and cooling fan. The ultimate objective is to ensure that the maximum component temperature specified by the manufacturer is not reached.
In addition to providing high thermal conductivity, the TIM must also provide adequate electrical insulation properties; this is especially and increasingly important in high-voltage environments such as those experienced in modern electric vehicles. The better balanced the compromise between thermal conductivity and electrical insulation capability of the TIM, the higher the performance and reliability of the entire power electronics module over its service life.
To read this entire article, which appeared in the March 2022 issue of PCB007 Magazine, click here.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
IMI Welcomes New CEO
05/03/2024 | IMIIntegrated Micro-Electronics, Inc. (IMI),The IMI Board of Directors announced, in a disclosure dated April 25, 2024, the appointment of Louis Sylvester Hughes, Chief Executive Officer (CEO).
Electronics Industry Sentiment Rose in April, Hitting New High
05/02/2024 | IPCApril 2024 marked the third consecutive month of sentiment growth among electronics manufacturers. When asked if they expected labor costs for hourly workers to rise over the next month, manufacturers in the United States, Mexico, and Europe predicted a five percent increase, while manufacturers in Asia predicted a slightly lower four percent increase.
iNEMI Names Grace O'Malley CTO
05/02/2024 | iNEMIThe Board of Directors of the International Electronics Manufacturing Initiative (iNEMI) has named Grace O'Malley Chief Technical Officer (CTO).
ZESTRON Academy Launches 2024 Advanced Packaging & Power Electronics Webinar Series
05/01/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, proudly announces the launch of its highly anticipated webinar series on Advanced Packaging & Power Electronics, a webinar series on the latest innovations, cleaning, and corrosion challenges.