-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Candor Nails the ROI With InduBond
June 7, 2022 | Nolan Johnson, I-Connect007Estimated reading time: 2 minutes
Nolan Johnson follows up on his original interview with Sunny Patel, engineering manager at Candor Industries, about the economics of this new InduBond X-Press 360 lamination press. It sounds like Sunny has hit the “easy” button with the installation of this machine.
Nolan Johnson: You recently installed the InduBond X-Press 360 lamination press. There’s a lot of hype and promise around this particular technology regarding energy savings and versatility. What are your impressions in using this press?
Sunny Patel: Well, the hype is real. It’s such a great machine. Because of its simplicity and the flexibility of use, I find it a lot easier to work with than our previous press. The energy savings speak for themselves; the capabilities of going up to 375°C and 65 kg/cm2 pressure allows us to do pretty much any kind of pressing. The name of the game right now is to try to increase your available capabilities; the press does that without many difficulties. You don’t need a PhD on the machine and it’s very easy to use. We’re very happy with it.
Johnson: That’s great to hear. Capabilities and energy use are two of the things that are significantly better. Is there a positive impact on throughput?
Patel: Yes. The system that we used before was a good system. But the nice thing about the InduBond is you can control both the heating and the cooling. Because everything is so dialed in, the time we used to take to wait for the cooling has dramatically decreased. There’s a lot of throughput increase as well, not only on that side, but also the layout process, because previously we had used a continuous copper foil lamination system. Other people may not have the same problem; they would have problems with pinning. Our headache may not have been pinning, but other board shops may find this a lot easier because it’s a pinless system.
You don’t have to move around bulky press plates. Just build your book, put in your stainless steel, and just keep stacking; it’s simple to do. I can do it and I never ran a press before this one. Overall, throughput has increased, just because of the capability. The smaller your press stack is, the faster you can heat up because there’s less load. You can even do the small quick-turns pretty fast.
Johnson: Have you had a chance to put together some numbers on how the operating costs have changed? For example, you said that the energy savings are dramatic. What are the numbers?
Patel: I don’t have the numbers in front of me, but I believe I calculated one press before to be $40 or $50 a lamination press cycle. Now it’s around $5. If you add up all the presses, it’s quite a significant savings. Not only that, but we’re using less copper. And because the layout is easier, we’re saving on time.
To read this entire conversation, which appeared in the May 2022 issue of PCB007 Magazine, click here.
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.