-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Happy’s Design Tips for Material Conservation
August 25, 2022 | Happy Holden, I-Connect007Estimated reading time: 1 minute
Note: For this issue, Happy Holden provided a range of options for designers who are seeking to conserve materials in their next design. He also offered an example of the relative cost index, or RCI, that he developed at HP exclusively for PCB design. With this RCI, designers can figure out the relative cost of a new design compared to an eight-layer through-hole board.
- Consider making the board thinner; eliminate prepregs
- Design to HDI for smaller board or fewer layers (Figure 1 and Reference 1)
- Design inner layers with 1 to 2 mil smaller traces/spaces
- Swing vias for BGA breakout can reduce layer count
- Nesting and rotation on panels
- Using HDI “skip vias” to eliminate a build-up layer
Consider using new technologies:
- VeCS can reduce layer count (Figure 2 and Reference 2)
- Additive creates more routing per layer and smaller boards
- Switch HDI layers to RCF (RCC)
- Power mesh can yield fewer layers (Reference 3)
- Landless vias on the surface can mean higher routings (Figure 3 and Reference 4)
- Smaller panel peripheral border
- Different panel sizes for higher utilization
- Add-on 0.062" gold fingers as components
- Board replacement for X-outs and repanelization (Reference 5)
- Inkjet solder mask just on traces/pads
Figure 1: Replacement chart for through-hole to HDI with Relative Cost Index. Note: RCI = the relative cost compared to an eight-layer through-hole board (RCI=1.0). DEN = total wiring in inches per square inch (diagonals of equivalent density).
Figure 2: VeCS (Vertical Conductive Structures) is a licensed technology using low-footprint vertical controlled impedance interconnect with low-leakage ground shielding capable of matching interconnect impedance with SE and differential microstrip and striplines. VeCS also provides high-density differential routing solutions in =/< 1.0 mm BGA area. Unique “anti-pad” layers provide a higher cross-section area for power and heat dissipation.
Figure 3: A variety of examples of landless vias on the outer layers of a PCB.
References
- The HDI Handbook, by Happy Holden, et al, BR Publishing, Salem, Oregon, 2009.
- Happy’s TechTalk #1: Vertical Conductive Structures (VeCS), by Happy Holden, PCB007 Magazine, October 2021.
- “Innovative Use of Vias for Density Improvements,” by Happy Holden, The PCB Magazine, November 2016.
- “Against the Density Wall: Landless Vias Might be the Answer,” by Happy Holden, The PCB Magazine, June 2016.
- Happy’s TechTalk #6: Looking at the Process of Repanelization, by Happy Holden, PCB007 Magazine, March 2022.
This article originally appeared in the August issue of Design007 Magazine, here.
Suggested Items
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.