Taiyo Names Yuya Suzuki Marketing Manager for IC Packaging Materials


Reading time ( words)

Taiyo America, Inc., a subsidiary of the world's leading manufacturer of specialty inks and solder masks for printed circuit boards, has named Dr. Yuya Suzuki to the position of IC Packaging Marketing Manager.

Suzuki received his Master of Engineering degree from University of Tokyo in 2007 (department of applied chemistry), and recently received his PhD of Engineering from Georgia Tech in 2017 (department of Materials Science and Engineering). 

He has more than 12 years of experience in the industry as a researcher on polymer synthesis, development of electronic materials and its processes for RF modules, and development of micro-via and trench processes by laser and ozone for high-density packaging.

Tadahiko Hanada, President and Director at Taiyo America says, “Dr. Suzuki brings a tremendous amount of knowledge and experience to Taiyo. He is an excellent addition to Taiyo America’s sales and marketing team. I look forward to working with Dr. Suzuki and being a part of this team as he works with the IC industry in developing Taiyo’s next-generation products.”

Suzuki will reside in Southern California.

About Taiyo America, Inc.

TAIYO AMERICA, INC., a subsidiary of TAIYO HOLDINGS. CO., LTD., is the world’s leading manufacturer of specialty inks and solder masks for printed circuit boards.

For over 25 years, Taiyo America has propelled itself into the latest technologies and trends, and continues to use its extensive worldwide R&D resources to further offerings and capabilities that include the latest in inkjet technology for legend ink.

The Carson City, Nevada facility offers specialty dielectric inks and via filling inks for use with microvia and build-up technologies, as well as thermal-cure and UV-cure solder masks and legend inks. New offerings include dielectric and conductive ink products for the printed electronics, and lighting and displays markets. For more information, click here.

Share

Print


Suggested Items

Benchmarking Your Process Engineering

04/29/2021 | I-Connect007 Editorial Team
Mark Thompson has been in bare board fabrication for over 30 years. He is now laying out printed circuit boards at Monsoon Solutions, a high-tech design bureau near Seattle, Washington. With Mark’s extensive hands-on knowledge of PCB manufacturing, he brings a unique perspective to PCB design. In this discussion with the I-Connect007 editorial team, Mark shares what’s important from a process engineer’s point of view, and how to stay on top of evaluating and benchmarking your manufacturing process, along with insights from his new role as a designer.

EIPC Technical Snapshot: 5G and Loss Minimisation

03/26/2021 | Pete Starkey, I-Connect007
Bringing a specialised technical area into sharp focus, this month’s topic was “5G and the understanding of loss minimisation at the PCB level,” with papers on dielectric material, copper foil, and modelling solutions. The webinar was moderated by EIPC board member Paul Waldner managing director of Multiline International Europa, who admitted that he had managed to get a haircut especially for the occasion!

PCB Requirements for E-Mobility

03/23/2021 | I-Connect007 Editorial Team
Nolan Johnson, Barry Matties, and Happy Holden speak with Christian Klein, section manager for PCBs in the automotive electronics division, about Bosch’s recent presentation on PCB requirements of the future in regard to automotive and electro mobility trends and challenges.



Copyright © 2021 I-Connect007. All rights reserved.