EIPC Presents Technical Snapshot Webinars


Reading time ( words)

During the Autumn of this year, EIPC will be organising three webinars which will be of particular interest to those involved with automotive, telecom and high-speed technology. We will have three well-known PCB industry speakers, each of whom has their own view on the technology challenges facing this industry.

These webinars will be held on Wednesdays October 14, November 18, and December 16.

They will last for some 45 minutes with each speaker taking 15 minutes for their presentations and then the webinar will be open for questions and comments from the participants. These webinars will be free to EIPC members and € 50 for non-members.

This first session will focus on automotive technology and some of the key factors driving the global Automotive Printed Circuit Board industry. They will look at how the whole supply chain of PCB manufacturing can be ready for that change which will need input on materials, processes, measurement systems, reliability, and environmental impact and are there some new technologies for PCB manufacturing which will support these new demands.

The webinar on 14th of October will start at 15.00 hrs.

Presentations

Lenora_Clark.jpgLenora Clark from ESI Automotive

Her presentation topic: An exploration of advanced semiconductor packaging’s effect on automotive electronic hardware design and assembly. In the presentation there will be discussion and review on all aspects of the electronic build, starting with how increased performance influences the semiconductor packages, how that then affects design for PCB fabrication, and finally it considers the influence on materials for perfect assembly.

alun_morganAlun Morgan from Ventec

His presentation topic: "Reliability needs to be designed-in from the lowest level." In the presentation you will hear about cutting-edge technology demands more care to ensure reliability and resilience.

paul_waldnerPaul Waldner from Multiline

His presentation topic: "Multilayer Printed Circuit Requirements for the Automobile Industry in the Age of High Speed." In the presentation you will hear some new ideas on multilayer pressing technology and how the registration can be improved to fulfil the demand for tighter tolerances

Registeration is free of charge to EIPC Members. The Non Member fee is € 50.-

To register for October 14, visit eipc.org.

Share

Print


Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

04/30/2021 | Nolan Johnson, I-Connect007
This week’s biggest news came in the form of industry briefings—there were a lot of them and the news was universally positive. The news you need to read for this week includes three reports from IPC detailing: the strength and risks in the global economic recovery; a strong EMS book-to-bill ratio; and strong North American PCB sales. Zeroing in on a single company, Apple reported a significant jump in revenue.

Isola Releases IS550H Material

04/26/2021 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Michael Gay of Isola and Chris Hunrath of Insulectro about the release of their new halogen-free, high-thermal reliability material, which they hope fills the gap in the market between epoxies and polyimides.

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

04/23/2021 | Andy Shaughnessy, I-Connect007
This week, we bring you a wide swath of news, columns, and articles from the past week. Altium announced a new cloud platform that connects design stakeholders with users of its Altium 365 environment. Cadence Design Systems has acquired a company that develops computational fluid dynamics technology to help expand its system analysis offerings.



Copyright © 2021 I-Connect007. All rights reserved.