The Continuing Success Story of Lino's Mission


Reading time ( words)

Lino's mission is following the plan. It's all about serving the customer and doing the best we can, Still having fun after 30 years in the industry.

Watch the interview here.

Share




Suggested Items

A Sharper Image

10/24/2022 | I-Connect007 Editorial Team
We recently spoke with Loren Davidson, a senior manufacturing engineer at TTM Technologies in Chippewa Falls, Wisconsin. In this wide-ranging discussion, Loren details the medium-volume facility’s imaging processes and equipment, a variety of imaging tricks of the trade, and why it’s so important to make decisions based on solid statistical data.

A Focus on Process Control, Part 1

09/27/2022 | I-Connect007 Editorial Team
Michael Carano is a noted subject matter expert with respect to process control, electroplating and metallization technology, surface finishing, and reliability. So, it was only natural that we sat down to talk about mechanizing an existing facility given today’s fickle environment. Will any of the CHIPS funding trickle down to bare board fabrication? What process can be adjusted on the factory floor? The focus needs to be more than just on manufacturing and getting work out the door, he says, but also process control.

IPC's I-Connect007 Acquisition Update With John Mitchell

08/05/2022 | Nolan Johnson, I-Connect007
Editor Nolan Johnson speaks with I-Connect007 Publisher Barry Matties and IPC President and CEO John Mitchell about IPC's acquisition of the publishing company, and what this means to I-Connect007's readers.



Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.