The Chemical Connection: Reducing Etch System Water Usage, Part 2
It’s Only Common Sense: Nice Guys Really Can Finish First
The Right Approach: I Hear the Train A Comin'Brigitflex Purchases 60 Inch Wide Chemcut Etcher for PCB Production
January 4, 2024 | Chemcut CorporationEstimated reading time: Less than a minute
Brigitflex Inc., a manufacturer of large circuit boards, has purchased a 60-inch-wide etcher from Chemcut, the United States’ leading manufacturer and supplier of Develop/Etch/Strip equipment. The new etcher will be included with their Excellon 154L Vision Driller & Router System and their state-of-the-art Autoclave machine. The new tool will be installed in their Elgin, IL manufacturing facility.
Brigitflex, Inc. stated, “We pride ourselves in being able to produce our own materials in our presses and adapt to new prototype products and specialty materials. The new Chemcut systems will allow us to continue the tremendous success Brigitflex has experienced over a 40 year history of a single owner company, and further expand our customer base. We can expect exceptional performance, excellent reliability, and low cost of ownership with our new Chemcut 60-inch etcher. Our advancement and continued success in multilayer flexible circuit board manufacturing along with large scale format customer designs".
Share on:
Suggested Items
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
The Chemical Connection: The High Cost of Etcher Non-maintenance
12/28/2023 | Don Ball -- Column: The Chemical ConnectionWe all understand that day-to-day maintenance and long-term preventive maintenance of etching equipment is a good thing. However, the pressing need to get product out the door in the face of tough production schedules can sometimes cause us to delay necessary maintenance for long periods of time. In some cases, we become fixated on short-term production and forget about long-term stability.
Brigitflex Purchases 60 Inch-Wide Chemcut Etcher for Printed Circuit Board Production
10/26/2023 | Chemcut CorporationBrigitflex Inc., a manufacturer of large circuit boards, has purchased a 60-inch-wide etcher from Chemcut, the United States’ leading manufacturer and supplier of Develop/Etch/Strip equipment. The new etcher will be included with their Exellon 154L Vision Driller & Router System, along with their state-of-the-art Autoclave machine. The new tool will be installed in their Elgin, IL. manufacturing facility.
The Chemical Connection: Don’t Just Blame the Etcher
09/25/2023 | Don Ball -- Column: The Chemical ConnectionIf your HDI or UHDI production process is quality challenged, don’t assume your etcher is to blame. Many factors impact the quality of the final product, so assess broadly, and you may find that the “the devil is in the details.” Generally, the first place most people can get good product specification measurement is at the end of the etching process, It’s natural and easy to blame quality shortcomings on the etcher. By all means, look at your etcher and invest some time trying to improve its performance but don’t stop there. Other factors may be affecting the etch uniformity.
BAE Systems Succeeds in First Tactical Configuration Ground-Launched Test of APKWS Laser-Guided Rockets
06/01/2020 | Business WireBAE Systems successfully completed test shots of its APKWS® laser-guided rockets from a tactical configuration ground-based weapon system for the first time.